Extra Heavy 10-14 oz Vegetable Tanned Leather Belt Blank w

This offering is for an extra heavyweight thick veg tan leather "belt blank" which means it comes with pre-punched holes, matching keeper, rounded end, and pre-skived turn back for an easy fold over a buckle.  If you are making a new belt or just need to replace an old belt with new leather, you are in the right place.

This offering is for an extra heavyweight thick veg tan leather belt blank which means it comes with pre-punched holes, matching keeper, rounded end, and pre-skived turn back for an easy fold over a buckle. 

If you are making a new belt or just need to replace an old belt with new leather, you are in the right place. This is essentially a normal leather strip that is a couple steps closer to becoming an actual finished belt. We did the work so you don't have to, just add hardware. To make our belt blanks, we punch four holes for snaps or rivets and one longer oblong hole for the belt buckle's prong to come through. We also round off the end of the strip as well as skive down the thickness of the turn-back to make it an easier fold over a buckle. On the unfinished side of the leather, we skive (make the leather thinner) from the last hole to the end of the belt, down to about 5-7oz thick. This makes it much easier to fold over a buckle when you are assembling a finished belt. This listing comes with a matching keeper. 

This offering is for an extra heavyweight thick veg tan leather belt blank which means it comes with pre-punched holes, matching keeper, rounded end, and pre-skived turn back for an easy fold over a buckle.  If you are making a new belt or just need to replace an old belt with new leather, you are in the right place. This is essentially a normal leather strip that is a couple steps closer to becoming an actual finished belt. We did the work so you don't have to, just add hardware. To make our belt blanks, we punch four holes for snaps or rivets and one longer oblong hole for the belt buckle's prong to come through. We also round off the end of the strip as well as skive down the thickness of the turn-back to make it an easier fold over a buckle. On the unfinished side of the leather, we skive (make the leather thinner) from the last hole to the end of the belt, down to about 5-7oz thick. This makes it much easier to fold over a buckle when you are assembling a finished belt. This listing comes with a matching keeper. 

This offering is an extra heavy weight 10-14oz veg tan leather belt blank with snaps which means it comes with pre-punched holes, matching keeper, choice of snaps, rounded end, and pre-skived turn back for an easy fold over a buckle. If you are making a new belt or just need to replace an old belt with new leather, you are in the right place. This is essentially a normal leather strip that is a couple steps closer to becoming an actual finished belt.

Extra Heavy 10-14oz Vegetable Tanned Leather Belt Blank w/ Snaps and Matching Keeper | 60 inch-70 inch Length, Black

ELW Leather Blank Belt, 10 to 15 oz Thickness

Extra Heavy 10-14oz Vegetable Tanned Leather Belt Blank W/ Snaps and M – Stonestreet Leather

Finished Leather Belt Strips Blanks 9-10 oz. Choice of 4 Colors & 2 Widths Black / 1.5 inch / Brass

ELW Leather Blank Belt, 5-6 Oz. (2-2.4mm) Thickness

Leather Belt Blank

Vegetable Tanned Leather Belt Blank w/ Snaps and Matching Keeper | 50-60 Length 8/9oz (3.2-3.6mm) / 1.5 Wide / Antique Brass

ELW Leather Blank Belt, 5-6 Oz. (2-2.4mm) Thickness, Size: 1/2x52 (1.27x132cm), Cowhide Vegetable Tanned, Full Grain Strip, Strap

Belt Blanks – Stonestreet Leather

CarverLeatherSupply