Weldcote White Anti Borax Flux - Bemidji Welder's Supply

Procedure: Thoroughly clean the work piece; breaks should be enlarged to a V-notch. Heat the end of the metal rod with a torch and dip into the flux or sprinkle the flux on the work piece. At the right temperature, flux will turn into a liquid that rapidly flows into all cracks and crevices. removing oxides and other impurities. Continue to melt the filler rod until the break or joint is filled, avoiding overheating. It is well to remember that in brazing, only the filler metal is melted. Weldco
Procedure: Thoroughly clean the work piece; breaks should be enlarged to a V-notch. Heat the end of the metal rod with a torch and dip into the flux or sprinkle the flux on the work piece. At the right temperature, flux will turn into a liquid that rapidly flows into all cracks and crevices. removing oxides and other impurities. Continue to melt the filler rod until the break or joint is filled, avoiding overheating. It is well to remember that in brazing, only the filler metal is melted. Weldcote White Anti Borax Flux may also be used as a paste by adding water and mixing well. Brush the paste on the work piece and also on the brazing rod, allow the paste to dry and apply heat. Flux residues wash off completely using hot water.

White Brazing Flux #601

BENTISM 145A MIG Welder, 3 in 1 Combo Gasless MIG/Lift TIG/MMA with Welding Machine, 110 V Flux Core/Solid Wire Welding Machine with IGBT Inverter & MIG Torch

Welding and Abrasives Products Online Catalog

Weldcote White Anti Borax Brazing Flux, Brazing powder flux that is active in the temperature range 1400-2200°F/760-1205°C. It is used for brazing

White Anti-Borax Flux

Welding and Abrasives Products Online Catalog

Forge Borax Welding Flux

Shop Top of the Line Welding Gear – Baker's Gas & Welding Supplies, Inc.

Home - Barnes Welding Supply

Welding Flux Borax, Borax, 1 Bag White Borax Flux, for Melting Gold Silver, Specification:, Features:, 1. Borax has a wide variety of uses, a

Welding Flux Borax, Borax, 1 Bag White Borax Flux, For Melting Gold Silver

White Paste Brazing Flux – Canada Welding Supply Inc.

White Creamy Consistancy Contains 1 lb. Excess flux can be removed with hot water This Silver Brazing Paste Flux is a general purpose broad temperature range flux. It works well on ferrous and non-ferrous alloys as well as stainless steel and carbides.

Superior White Brazing Flux #601