Tool Grip and Tether Attachment Point

By A Mystery Man Writer

Last updated 15 Jul 2024

The Tool Grip and Tether Attachment Point installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job.

The Squids 3745 Tool Grip and Tether Attachment Point (2-pack) installs onto screwdrivers and nut drivers to create a retrofit attachment point for tethering tools up to 1lb // 0.45kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools like screwdrivers and nut drivers. While working at heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>
Designed in two pieces, this tool attachment features an end cap and a rubber sleeve. To install, slide a screwdriver or nut driver into the rubber sleeve and plug the end cap’s pegs into the reinforced holes of the rubber sleeve. The sleeve features a textured rubber and is ergonomically designed to cover the entire tool handle—providing greater comfort, torque and an enhanced grip. The end cap features a swiveling connection point for tool tethering, which helps prevent tangles and binding when used with a tool lanyard.</p>
Built-in trim lines on the sleeve allows for this tool attachment to be customized to fit varying driver lengths. A flexible opening on the bottom of the rubber sleeve expands to allow for larger nut drivers to be installed. Unlike competition, this tool attachment grip can be installed, removed and re-installed multiple times. The swiveling tool attachment portion does not interfere with proper holstering or prevent a user from pressing down on the end of the tool to gain leverage when using.</p>

TESTED TO BE TRUSTED</h3>
These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 1lb // 0.45kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>
Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>
This tool attachment is compatible with screwdrivers or nut drivers with handles ranging from 1in // 2.5cm to 1.28in // 3.2cm in diameter and a handle height of 4.5in // 11.4cm</p>

20V MAX* XR? Brushless Tool Connect? Hammerdrill (Tool Only) with Lanyard Ready Attachment Point - TLR-DCD997B

3M™ DBI-SALA® Hard Hat Tether 1500178 10 EA/PACK

Klein Gated Bucket Hook

Ergodyne Squids 3745 Tool Tethering Tool Grip Attachment : : DIY & Tools

New Tool Tethering Solution Hits the Sweet Spot: Simplicity, Safety and Performance

Power Tool Bracket – Pneumatic Tool Trap

Self-locking carabiner Third party certified to a 15 lb. (6.8 kg) maximum capacity with 2:1 safety factor 5/8 tubular webbing 32 in. (81.3 cm) in length relaxed, 47 in. (119.4 cm) in length stretched Details Self-locking carabiner Third party certified to a 15 lb. (6.8 kg) maximum capacity with 2:1 safety factor 5/8 tubular webbing 32 in. (81.3 cm) in length relaxed, 47 in. (119.4 cm) in length stretched Bungee tool tether, 15 lb. (6.8kg) capacity, self-locking carabiner.