Smooth-On Rubber Glass™

lt;p><strong>Rubber Glass™</strong> is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container.</p> <p></p> <p>The mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding <strong>Silc-Pig™</strong> liquid color pigments.</p> <p><strong>Rubber Glass™</strong> can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications.</p> <p></p> <p>Instructions</p> <p><strong>MEASURING & MIXING</strong></p> <p>Materials should be stored and used in a warm environment (73°F/23°C). This product has a limited shelf life and should be use as soon as possible. Mixing containers and stirring sticks should be made of plastic and must be clean and dry. Wear safety glasses, long sleeves and vinyl gloves to minimize contamination risk.</p> <p>Dispense One Part A and One Part B by weight or volume into mixing container. Mix thoroughly for at least three minutes, making absolutely sure that you scrape the sides and bottom of your container several times.</p> <p>Do not whip or agitate material as this may cause air bubbles. If completely bubble free castings are required, vacuum degassing material prior to pouring will eliminate all bubbles.</p> <p><strong>POURING & CURING</strong></p> <p><strong>Pouring</strong> - Pour mixture into a plastic container or mold (ice cube trays or plastic cups made of polyethylene work well). If pouring into or over other surfaces, be aware that cure inhibition is possible (see section -“<strong>Cure Inhibition</strong>”). If casting into silicone molds, a release agent (<strong>Ease Release™ 200</strong> available from Smooth-On) is required.</p> <p><strong>Curing</strong> - Let cure overnight at room temperature (73°F/23°C). Do not cure rubber where temperature is less than 65°F /18°C. You can cure the material faster by applying mild heat (150°F/60°C).</p> <p><strong>INHIBITION & PERFORMANCE</strong></p> <p><strong>Cure Inhibition</strong> - If compatibility between the rubber and the surface that you are pouring rubber over is a concern, a small scale test is recommended. Materials found to cause cure inhibition include sulfur-based modeling clays and latex rubber. If pouring <strong>Rubber Glass™</strong> over a model surface that you think might cause inhibition, apply a “barrier coat” of clear acrylic lacquer sprayed directly over all surfaces that will come in contact with the <strong>Rubber Glass™</strong> is usually effective.</p> <p><strong>Adhesion:</strong> <strong>Rubber Glass™</strong> may stick to some surfaces such as glass. A coating of <strong>Ease Release™ 200</strong> will facilitate release from any surface.</p> <p><strong>Material Performance</strong> - Once material has fully cured it can be removed from the container or mold. Cured <strong>Rubber Glass™</strong> is now ready to be displayed as is or broken/crumbled for your specific application.</p> <p><strong>Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.</strong></p> <p></p> <p></p>
Rubber Glass™ is a platinum-catalyzed silicone rubber product developed specifically for special effects and display applications. Two liquids (1 Part A + 1 Part B) are mixed together and poured into a container. The mixture cures overnight to a solid water clear rubber that can then be easily broken or “crumbled” into pieces that look exactly like broken glass, ice or diamonds. Vibrant colors are possible by adding Silc-Pig™ liquid color pigments. Rubber Glass™ can be used to create a variety of special effects (i.e. simulated broken glass where human contact is required) and model effects (i.e. simulated ice or water). It can also be used for electronic encapsulation applications. Instructions MEASURING & MIXING Materials should be stored and used in a warm environment (73°F/23°C). This product has a limited shelf life and should be use as soon as possible. Mixing containers and stirring sticks should be made of plastic and must be clean and dry. Wear safety glasses, long sleeves and vinyl gloves to minimize contamination risk. Dispense One Part A and One Part B by weight or volume into mixing container. Mix thoroughly for at least three minutes, making absolutely sure that you scrape the sides and bottom of your container several times. Do not whip or agitate material as this may cause air bubbles. If completely bubble free castings are required, vacuum degassing material prior to pouring will eliminate all bubbles. POURING & CURING Pouring - Pour mixture into a plastic container or mold (ice cube trays or plastic cups made of polyethylene work well). If pouring into or over other surfaces, be aware that cure inhibition is possible (see section -“Cure Inhibition”). If casting into silicone molds, a release agent (Ease Release™ 200 available from Smooth-On) is required. Curing - Let cure overnight at room temperature (73°F/23°C). Do not cure rubber where temperature is less than 65°F /18°C. You can cure the material faster by applying mild heat (150°F/60°C). INHIBITION & PERFORMANCE Cure Inhibition - If compatibility between the rubber and the surface that you are pouring rubber over is a concern, a small scale test is recommended. Materials found to cause cure inhibition include sulfur-based modeling clays and latex rubber. If pouring Rubber Glass™ over a model surface that you think might cause inhibition, apply a “barrier coat” of clear acrylic lacquer sprayed directly over all surfaces that will come in contact with the Rubber Glass™ is usually effective. Adhesion: Rubber Glass™ may stick to some surfaces such as glass. A coating of Ease Release™ 200 will facilitate release from any surface. Material Performance - Once material has fully cured it can be removed from the container or mold. Cured Rubber Glass™ is now ready to be displayed as is or broken/crumbled for your specific application. Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Boo Glass, 12 Rubber Grommet Beaker Base Bong

Rubber Glass™ Product Information

Smooth-On Sorta Clear 37, 2 Gallon Set – Douglas and Sturgess

Encapso™ K is a water clear encapsulation rubber that looks just like water and is ideal for a variety of encapsulation and display applications.

Smooth-On Encapso™ K

Rebound™ Series, Brushable Platinum Silicone Rubber

Smooth-On, Inc., Mold Making & Casting Materials

Encapso™ K, Water Clear Encapsulation Rubber

Varflex Corporation Varglas Silicone Rubber Sleeving

BAMBOO GLASS STORAGE JAR – That Organized Home

Rubber Glass/Ice - Special Effects Unlimited

Smooth-On Rubber Glass (Water-Clear Silicone Rubber) – TILT Professional Makeup

ROUND MULTI COLOR SOFT GLASS LARGE GLASS ON RUBBER BUBBLER 22

Rubber Glass/Ice - Special Effects Unlimited

Rubber Glass™, Water-Clear Silicone Rubber

Viski Wayfair