Smooth-On Plasti-Paste II

New and improved Plasti-Paste II is a harder, drier, and more paintable version of the original Plasti-Paste.
New and improved PlastiPaste II is a harder drier and more paintable version of the original PlastiPaste Easy to handle and easy to control PlastiPaste II doesnt exude oil and it can be sanded drilled and painted with primer and/or acrylic paints when cured making it suitable as a mother mold material or as a fabrication material Used in the same way as the original PlastiPaste PlastiPaste II has a mix ratio of 1A:2B by volume with a working time of 10 minutes and a handling time of 90 minutes at room temperature (depending on mass) PlastiPaste II is dimensionally stable and heatresistant up to 130F/55C (158F/70C after curing) It bonds to itself permanently so more can be added at any time as long as the cured plastic surface is clean PlastiPaste II is odorfree and mercuryfree

Plasti-Paste™ II - Trowelable Plastic Paste

Plasti-Paste II Available in the US and Canada - Reynolds Advanced Materials

DIY Servo Beating Heart - The Egg Sisters

N95 – Jay Rosen Design

Plasti-Paste™ II – Trowelable Plastic for Vertical Surface / Support Shells

Smooth-On Brush-On™ 40

Plasti-Paste™, Trowelable Plastic Paste

SILICONE - ecoflex - ecoflex

Plasti-Paste II - Trowelable Plastic Paste - Gallon Unit : Arts, Crafts & Sewing

Smooth-On - Modulus Props creates a gorgeous mold with Rebound 25 platinum silicone and two-part shell with Plasti-Paste . #smoothon #moldmaking #fox #foxmask #siliconemold #animalmasks

Plasti-Paste® II is a two component fibre-filled resin that is designed for vertical surface application. This no-odor formulation when cured can be

Plasti-Paste II Mould Reinforcement

Doctor Who - DIY Clockwork Droid Mask