Satin Poly Acrylic Sealer. (Gallon)

Protect your Bare Wood or Painted Surfaces with this Non-Yellowing Sealer. Two Ways to Use Our Poly. As a Sealer : Make sure the surface is free of dust. Apply Sealer using a Fine Filament Brush. Wait 3-4 hours dry time between multiple coats. Finely sand between coats & wipe Clean, TWO COATS RECOMMENDED. Allow Final Coat 8 hours to cure/dry. As a Glazing Finish : Make sure surface is free of dust. Apply sealer/glazing using a fine filament brush. Apply Pigment by sprinkling into the wet sealer. Use a second sealer dipped filament brush to spread the pigment across wet surface. Repeat to achieve desired effect. Move to new area and continue. (best to apply in small areas, so sealer will not dry before adding pigment.) CAUTION Use Poly Acrylic Sealer in a well Ventilated Area. Clear Satin Finish - Great for Protecting Bare Wood or Painted Surfaces Non-Yellowing Sealer - Low VOC - Low Odor Two Different Ways to use the Poly - Bare Wood & Painted Surfaces or Create a Glazing Finish Glazing Finish - select from 13 pigment colors (pigment sold separately) Caution: Use Poly Sealer in a well Ventilated Area. STIR THOROUGHLY - DO NOT SHAKE - AVOID BUBBLES Keep out of reach of children Caution: Use Sealer in a well Ventilated Area.

Self leveling, smooth clear finish with max top coat durability - Fast dry, durable formula covers up to 125 sq. ft. per quart High clarity protective coating for indoor wood projects provides a crystal clear finish. Premium polyurethane retains the same clear finish as the day it was applied and will not yellow with time.

Varathane 1 Qt. Clear Satin Water-Based Interior (2-Pack)

Arm-R-Seal Urethane Topcoat

Restore Old Clear Acrylic Floor Sealers - Restore-A-Seal™ by DURÁVEL - Durável

Retique It Polyacrylic 16oz Pint 5

General Finishes Enduro Pigmented White Poly is a high-solids, pigmented water-based wood finish engineered for cabinets and millwork. Use only over General Finishes White Undercoat or Stain Blocker. White and Clear can be used as tint bases to achieve endless colors. For non-architectural use.

General Finishes Enduro White Poly Satin

HIGH QUALITY SURFACE FINISH: Our polyurethane sealer for wood, floor, and concrete surfaces provides scratch, crack, moisture, UV and chemical

Eco-Poly Polyurethane Sealer, Floor Finish, Wood Floor Sealer and Concrete Sealer, Non Toxic Water Based, No to Low Odor, 1 Gallon, Gloss

1 qt Minwax 63333 Clear Polycrylic Water-Based Protective Finish Satin - Minwax? Polycrylic? Protective Finish

Chalky Wall Sealer

Penetrating Sealer

DAICH Satin Acrylic Sealer - Daich Coatings

Seal Krete CLEAR-SEAL Urethane Acrylic Protective Sealer - Gloss Finish - GALLON - Southern Paint & Supply Co.

Protect your Bare Wood or Painted Surfaces with this Non-Yellowing Sealer. Two Ways to Use Our Poly. As a Sealer: Make sure the surface is free of

Gallon Water Based Satin Poly acrylic Sealer.

Minwax Polycrylic Clear Satin Water-Based Polyurethane Aerosol Spray (11.5-oz) in the Sealers department at