3D Puff Heat Transfer Vinyl SHEETS HTV 20 Donkey Craft Vinyl
By A Mystery Man Writer
Last updated 15 Jul 2024
Donkey Puff Heat Transfer VinylPLEASE NOTE: ***This product is a 3D Puff VINYL SHEET. Cutting and design services are NOT included.***Please consider that the black puff vinyl will turn dark gray after puffing.SPECIFICATIONThickness: 130 Micron (before), 500 Micron (after)Temperature: 292°F~310°F - Please make sure to
Donkey Puff Heat Transfer VinylPLEASE NOTE: ***This product is a 3D Puff VINYL SHEET. Cutting and design services are NOT included.***Please consider that the black puff vinyl will turn dark gray after puffing.SPECIFICATIONThickness: 130 Micron (before), 500 Micron (after)Temperature: 292°F~310°F - Please make sure to test the temperature first due to the heat sensitivity of the material. Please start from a low temperature and gradually increase the temperature by 5 degrees if the puffing is not working well.Pressure: MediumTime: 8~10 SecondsCutting Setting: 45-degree cutApply to Cotton, Uncoated Polyester, and Cotton-Polyester Blends excluding NylonDESCRIPTION- Puff Heat Transfer Vinyl: Cuttable vinyl with protective carrier and hot melt backing- Soft and Fluffy Puff effect is activated upon heat press and removal or protective film- Be aware of the result that 2mm or smaller space will disappear when the puff is activated.-Do not layer HTV APPLICATION***We do not recommend using any household irons or Cricut Easy Press because the transfer needs accurate temperature and even pressure.- Plotter cut the wanted design on the hot melt layer (Glossy Side up)- Mirror Cut- Weed the unwanted material- Place it on the fabric- Press at medium pressure- Remove the protective carrier at Hot Peel**** Please, make a small test cut before making your project
Donkey Puff Heat Transfer VinylPLEASE NOTE: ***This product is a 3D Puff VINYL SHEET. Cutting and design services are NOT included.***Please consider that the black puff vinyl will turn dark gray after puffing.SPECIFICATIONThickness: 130 Micron (before), 500 Micron (after)Temperature: 292°F~310°F - Please make sure to test the temperature first due to the heat sensitivity of the material. Please start from a low temperature and gradually increase the temperature by 5 degrees if the puffing is not working well.Pressure: MediumTime: 8~10 SecondsCutting Setting: 45-degree cutApply to Cotton, Uncoated Polyester, and Cotton-Polyester Blends excluding NylonDESCRIPTION- Puff Heat Transfer Vinyl: Cuttable vinyl with protective carrier and hot melt backing- Soft and Fluffy Puff effect is activated upon heat press and removal or protective film- Be aware of the result that 2mm or smaller space will disappear when the puff is activated.-Do not layer HTV APPLICATION***We do not recommend using any household irons or Cricut Easy Press because the transfer needs accurate temperature and even pressure.- Plotter cut the wanted design on the hot melt layer (Glossy Side up)- Mirror Cut- Weed the unwanted material- Place it on the fabric- Press at medium pressure- Remove the protective carrier at Hot Peel**** Please, make a small test cut before making your project
Abstract Oil Paint Marble Patterned HTV 895 – Donkey Craft Vinyl
Floral Pattern Vinyl, Glitter HTV, Patterned Iron on Vinyl, Faux
Alien Iron on Rhinestone Heat Transfer Animal Crystal Space Decor Clear Bling Patch Clothing Repair Hot Fix Applique
Thanksgiving Pumpkin Printed Pattern HTV, Iron on Vinyl, Puff Heat Transfer Vinyl Sheet, Adhesive Vinyl, Glitter HTV, Faux Leather H052
Circle Jerks (Keith Morris)
PUFF Heat Transfer Vinyl Sheet, Puff Htv Printed Sheet, 18 X 12
Buy Rainbow Chevron Printed HTV Pattern Vinyl Pattern HTV Faux
3D Puff Heat Transfer Vinyl, Puffy HTV
Retro Geometric Printed HTV, Patterned Vinyl, Iron on Vinyl, Faux
Marijuana Cannabis Leaves Printed HTV, Pattern Vinyl, Iron on
Puff Vinyl Sheets
3D Puff Heat Transfer Vinyl SHEETS HTV 20 Donkey Craft Vinyl - Denmark
3D PUFF HTV, 180 Colored Puff Vinyl, Puff Heat Transfer Vinyl – Donkey Craft Vinyl
Recommended for you
You may also like