Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –
By A Mystery Man Writer
Last updated 14 Jul 2024
A high build acrylic primer surfacer that easily fills grind marks, sand scratches and other minor surface imperfections. Sands easily to an ultra-fine finish with minimal shrinkage. Can be applied to properly prepared metal, body filler, polyester glazing putty, wood, fiberglass and aged sanded OEM topcoats.
SUBSTRATES
- Properly Prepared Steel, Galvanized and Aluminum
- Fiberglass
- SMC
- Rigid Plastics
- Body Filler or Putty
- Epoxy Primer
- Self-Etch Primer
NOTE: For best adhesion and corrosion resistance, treat all bare metal areas larger than a quarter in diameter with a self-etch primer prior to application.
CLEANING
- Surface must be clean and free of dirt, oil, grease and wax
- Solvent clean all areas to be coated with a quality wax and grease remover and wipe dry with a clean, dry cloth
- To solvent clean raw, exposed fiberglass, it is recommended to clean exposed area with acetone.
PREPARATION
Untreated Steel, Galvanized Steel and Bare Aluminum
- Sand surface with 180 - 220 grit sandpaper. Blow off the surface with an air blow gun and solvent clean all areas to be coated with a quality wax and grease remover and wipe dry with a clean, dry cloth.
- Follow paint company’s recommendations for surface prep and recoat of self-etch primer
Pre-Painted Surfaces
- Sand repair area and featheredge using 80, 180, 220 and finish with 320 grit sandpaper on a random orbital sander.
- Final clean with a quality wax and grease remover to remove sanding residue before priming.Sand repair area and featheredge using 180 grit, 220 grit and finish with 320 grit sandpaper on a random orbital sander
- Final clean with a quality wax and grease remover to remove sanding residue prior to application
Body Filler or Putty
- Finish sanding body filler or putty with 180-220 grit sandpaper
- Featheredge with 320 grit sandpaper
- Blow off the surface with an air blow gun
MIXING
- Shake and stir thoroughly before mixing
- Reduce 125% with #2296 Universal Zero VOC Reducer
- Mix thoroughly before pouring primer into the gun cup
APPLICATION
- Use a primer gun with a 1.4 to 1.8 fluid nozzle/air cap (Spray at paint gun manufacturer’s recommended air pressure)
- Apply 2-3 medium wet coats allowing 5-10 minutes flash time between coats
- FINISH
- Ready to sand in about 60 minutes depending on film build
- Once dry, sand with 400-600 grit sandpaper prior to next step
FINISH
- Ready to sand in about 60 minutes depending on film build
- Once dry, sand with 400-600 grit sandpaper prior to next step
Product# 2274 102274
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://www.jerzyautopaint.com/cdn/shop/products/51am_iNDHuL_195x.jpg?v=1613431678)
Products– Page 10–
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/51pmtB41nCL._AC_.jpg)
Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz : Automotive
Convenient Primer: Easily fills grind marks, sand scratches, and other minor surface imperfections Easily Applicable Primer: Use a primer gun with a
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/71b0K8pAsEL.jpg)
Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/51dyfyRag-L._AC_.jpg)
Evercoat Super Build 4:1 Polyester Primer Surfacer for Aluminum, Fiberglass & More - 128 Fl Oz : Automotive
Convenient Primer: Easily fills grind marks, sand scratches, and other minor surface imperfections Easily Applicable Primer: Use a primer gun with a
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/51lSaVh9JuL._AC_.jpg)
Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://images-na.ssl-images-amazon.com/images/I/91-MW9x5OwS._AC_UL600_SR600,600_.jpg)
Evercoat Super Build 4:1 Polyester Primer Surfacer for Aluminum, Fiberglass & More - 128 Fl Oz : Automotive
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://www.jerzyautopaint.com/cdn/shop/products/5096_600x600.png?v=1613431573)
Evercoat Dura-Build Acrylic Primer Surfacer - Gray, 2274 , 1 Gallon
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/71YX61GVDuL._AC_UF350,350_QL80_.jpg)
Evercoat Super Build 4:1 Polyester Primer Surfacer for Aluminum, Fiberglass & More - 128 Fl Oz : Automotive
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://www.jerzyautopaint.com/cdn/shop/products/3m-tape-pak_fbfaadcf-cf0d-4c3b-bc62-a1884fc37157_600x600.jpg?v=1613431388)
Evercoat Dura-Build Acrylic Primer Surfacer - Gray, 2274 , 1 Gallon
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://www.jerzyautopaint.com/cdn/shop/products/ATD-8715_0aede6c6-18ab-4ffa-8be4-f8df5176fcc0_600x600.jpg?v=1613431538)
Evercoat Dura-Build Acrylic Primer Surfacer - Gray, 2274 , 1 Gallon
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://m.media-amazon.com/images/I/51TEsGNiV3L._AC_.jpg)
Evercoat Dura Build Acrylic Primer Surfacer for Body Filler, Putty, Fiberglass and More - 128 Fl Oz : Automotive
* A premium high-build acrylic primer surfacer that easily fills grind marks, sand scratches and other minor surface imperfections * It sands easily
![Evercoat Dura Build Acrylic Primer Surfacer - Gray, 2274, 1 Gallon –](https://i5.walmartimages.com/seo/Fibreglass-Evercoat-FIB-2274-Dura-Build-Acrylic-Primer-Surfacer-Gray-Gallon_31287cb7-7647-44b6-8c54-8b4f8a91a1b1.d1c29c8ba2513986ac2442fe8337a46d.jpeg)
Fibreglass Evercoat FIB-2274 Dura Build Acrylic Primer Surfacer, Gray, Gallon
Recommended for you
You may also like