General Purpose Polyester Resin – 1 Gallon (includes Hardener / Catalyst) - Composite Envisions
By A Mystery Man Writer
Last updated 16 Aug 2024
Low profile, low shrink, DCPD, unsaturated polyester laminating resin. This resin is promoted, thixotropic, and formulated to be initiated with MEKP only. This product is used in the manufacture of glass fiber reinforced composites and is not recommended for use in composites that will have prolonged exposure to water, e.g. large marine craft. The appropriate
Low profile, low shrink, DCPD, unsaturated polyester laminating resin. This resin is promoted, thixotropic, and formulated to be initiated with MEKP only. This product is used in the manufacture of glass fiber reinforced composites and is not recommended for use in composites that will have prolonged exposure to water, e.g. large marine craft. The appropriate amount of Hardener / Catalyst is included (2 oz MEKP DDM-9 or Methyl Ethyl Ketone Peroxide). Please Note: Hardener / Catalyst has a 12 month shelf-life. Available by the drum. Please contact us for pricing. Features Low Laminate Exotherm Moderate Trim Time Excellent Fiberglass Wet-Out Excellent Toughness Maximum 32% HAP (Styrene) Benefits Good cosmetic surface and minimal glass print Good cycle times and moderate Barcol development Easy roll-out and high laminate physical properties High resistance to cracking and torsional stress Less odor and lower emissions in the shop
Low profile, low shrink, DCPD, unsaturated polyester laminating resin. This resin is promoted, thixotropic, and formulated to be initiated with MEKP only. This product is used in the manufacture of glass fiber reinforced composites and is not recommended for use in composites that will have prolonged exposure to water, e.g. large marine craft. The appropriate amount of Hardener / Catalyst is included (2 oz MEKP DDM-9 or Methyl Ethyl Ketone Peroxide). Please Note: Hardener / Catalyst has a 12 month shelf-life. Available by the drum. Please contact us for pricing. Features Low Laminate Exotherm Moderate Trim Time Excellent Fiberglass Wet-Out Excellent Toughness Maximum 32% HAP (Styrene) Benefits Good cosmetic surface and minimal glass print Good cycle times and moderate Barcol development Easy roll-out and high laminate physical properties High resistance to cracking and torsional stress Less odor and lower emissions in the shop
True Composites Fiberglass Resin Polyester Resin
Epoxy 7132, No Hardener, 1 Gallon – Douglas and Sturgess
General Purpose Polyester Resin Quart used.Ideally with fiberglass mat, cloth, roving, or stitch mats. Designed to be thin enough for easy wet-out.
General Purpose Polyester Resin, Quart
Resins & Foams - Composite Envisions
✅ GRADE A-True Composites is a renowned name for its premium product used in the marine industry! ✅ CURES FAST-Reach cured quickly-4 hours minimum to
True Composites Fiberglass Resin Polyester Resin Marine Grade Resin 1 Gallon with MEKP Hardener Polymer Resin Fiberglass Repair Kit Laminating Resin
Specialty Resin & Chemical General Purpose Clear Epoxy Resin 1 Gal
Polyester Resin
General Purpose Polyester Resin Kit, Gallon with 2 oz
Polyester Resin
is a low profile, low shrinkage, unsaturated polyester resin designed for room temperature curing with the addition of an MEK Peroxide catalyst.
General Purpose Polyester Resin
True Composites Fiberglass Resin Polyester Resin
Recommended for you
You may also like