You're Not Even On My Level - Sublimation Acrylic Blank with SVG – A Personal Touch

These little cuties have been specifically designed for sublimation printing! Available in 2mm clear cast acrylic or 3mm white cast acrylic (with other sizes available on request). Perfectly sized for a keychain, this little guy measures 3.4" (h) x 2.0" (w). The hole is 3mm diameter.  You will receive an email containi

These little cuties have been specifically designed for sublimation printing! Available in 2mm clear cast acrylic or 3mm white cast acrylic (with other sizes available on request).

Perfectly sized for a keychain, this little guy measures 3.4 (h) x 2.0 (w). The hole is 3mm diameter. 

You will receive an email containing the SVG which is correctly sized for the acrylic blank. Whilst you may not share or redistribute this SVG in any form, you can use it to create finished products using our acrylic blanks which you can sell. You may not use the SVG (in part or full) to create finished products other than those using our acrylic blanks.
 

Instructions:

- Peel the protective plastic/paper off BOTH sides of the acrylic blank

- Print the image using your sublimation printer/paper/ink. Print the image in reverse if you are doing a white blank but do not reverse if you're working on a clear blank. 

- Lay the printed image onto the acrylic blank. For the white blank, you will place the image face down on the front of the blank. For the clear blank, you will place the image on the rear of the blank. Place the blank face down on your heat press (so the paper is the contact point for the heat source. Press at approx. 160°C for 100 seconds. Remove from the heat and place between two heavy flat objects to cool. The acrylic will be very pliable when you remove it from the heat source so it needs to be weighted to flatten while it cools. 

- Remove the sublimation paper and clean any residue off using a magic eraser. 

- For the glitter example shown in the product photo, we applied glitter to the rear of the clear acrylic blank (after it was sublimation printed) then sealed it with a layer of resin.

Please note, these settings are just a guide. You will need to do your own testing as settings will vary dependent on your sublimation ink, sublimation paper and heat press. 

These little cuties have been specifically designed for sublimation printing! Available in 2mm clear cast acrylic or 3mm white cast acrylic (with other sizes available on request). Perfectly sized for a keychain, this little guy measures 3.4 (h) x 2.0 (w). The hole is 3mm diameter.  You will receive an email containing the SVG which is correctly sized for the acrylic blank. Whilst you may not share or redistribute this SVG in any form, you can use it to create finished products using our acrylic blanks which you can sell. You may not use the SVG (in part or full) to create finished products other than those using our acrylic blanks.  Instructions: - Peel the protective plastic/paper off BOTH sides of the acrylic blank - Print the image using your sublimation printer/paper/ink. Print the image in reverse if you are doing a white blank but do not reverse if you're working on a clear blank.  - Lay the printed image onto the acrylic blank. For the white blank, you will place the image face down on the front of the blank. For the clear blank, you will place the image on the rear of the blank. Place the blank face down on your heat press (so the paper is the contact point for the heat source. Press at approx. 160°C for 100 seconds. Remove from the heat and place between two heavy flat objects to cool. The acrylic will be very pliable when you remove it from the heat source so it needs to be weighted to flatten while it cools.  - Remove the sublimation paper and clean any residue off using a magic eraser.  - For the glitter example shown in the product photo, we applied glitter to the rear of the clear acrylic blank (after it was sublimation printed) then sealed it with a layer of resin. Please note, these settings are just a guide. You will need to do your own testing as settings will vary dependent on your sublimation ink, sublimation paper and heat press. 

Acrylic Blanks – My Sublimation Superstore

All Sublimation Blanks – Newie Blanks Co.

Acrylic Sublimation - Israel

All Sublimation Blanks – Newie Blanks Co.

Acrylic Blanks – My Sublimation Superstore

VILLCASE 45 Pcs Transfer Film Craft Mat Infusible Ink

Acrylic Blanks – My Sublimation Superstore

These are cut to order so give me a few days to get them cut after you order. READ THE DIRECTIONS BELOW ON HOW TO SUB THESE CAREFULLY! ITS DIFFERENT

Blank Acrylic cheer tag

Blank Acrylic w/SVG – CraftblanksCA

Please use this option to purchase this design as a printed heat transfer or sublimation transfer! If you are not familiar with apparel transfers,

Make Yourself A Priority - Heat Transfer | DTF | Sublimation (TAT 3 BU

Blank Acrylic w/SVG – CraftblanksCA

Acrylic Blanks – Finishing Touch Crafts, LLC

Blank Acrylic w/SVG – CraftblanksCA

Acrylic Blanks – My Local Maker

**IMPORTANT - READ FIRST** This is a digital mockup file. This is NOT a physical item that would be printed and shipped. This is NOT a print template.

Dye sublimation or vinyl 5x7 inch acrylic plaque vertical Mockup | Add your own image and background