NANOSKIN AUTOSCRUB 3 Start-Up Kit

NANOSKIN NANOSKIN AUTOSCRUB 3" Start-Up Kit Lasts up to 4 times longer than clay bars • For a flawless “show room perfect” shine • Glides on & off easily for a slick finish • If inadvertently dropped on shop floor, simply rinse clean    Kit includes:• 4 oz. NANO SHOCK Spray Lubricant Sealant x 1• 3" AUTOSCRUB Pad x
Limitless Car Care is your go-to resource for high quality and easy to use detailing products, developed with input from professionals and fanatics alike! We aim to provide amazing products combined with top-notch customer service and useful information to make sure that you enjoy detailing as much as we do.
NANOSKIN NANOSKIN AUTOSCRUB 3 Start-Up Kit Lasts up to 4 times longer than clay bars • For a flawless “show room perfect” shine • Glides on & off easily for a slick finish • If inadvertently dropped on shop floor, simply rinse clean    Kit includes:• 4 oz. NANO SHOCK Spray Lubricant Sealant x 1• 3 AUTOSCRUB Pad x 1• Hand Applicator x 1• Microfiber Towel 16” x 16” 280GSM x 1 Product Detail NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.    Application *For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant *To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic  Spray Lubricant Sealant. *For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass  Cleaner/Activator then follow with RAIN Glass Sealant.   DIRECTIONS: Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface. Thoroughly wash vehicle free of dust, sand, and dirt. Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.) Mist sufficient GLIDE onto the surface evenly. Polish the surface with dual action orbital polisher using light pressure (Low Speed). Wipe off residue with clean dry microfiber towel. NOTE: Using with 3” soft-edge DA pad is highly recommended. Sufficient lubrication is crucial to the AUTOSCRUB application.       Plain water is NOT an adequate lubricant.       DO NOT use with rotary polisher.       AUTOSCRUB is not solvent resistant.       Remove tar & grease before application   Helpful Tips: The AUTOSCRUB has a protective coating to ensure stability within transportation. To break in the pad, moisten the AUTOSCRUB with desired lubricant. Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky. Cold temperatures may stiffen pad. Warm surface before using.

NANOSKIN NANOSKIN AUTOSCRUB 3 Start-Up Kit

Lasts up to 4 times longer than clay bars

• For a flawless “show room perfect” shine

• Glides on & off easily for a slick finish

• If inadvertently dropped on shop floor, simply rinse clean 

 

Kit includes:
• 4 oz. NANO SHOCK Spray Lubricant Sealant x 1
• 3 AUTOSCRUB Pad x 1
• Hand Applicator x 1
• Microfiber Towel 16” x 16” 280GSM x 1

Product Detail

NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required. 

 

Application

*For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant

*To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic

 Spray Lubricant Sealant.

*For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass

 Cleaner/Activator then follow with RAIN Glass Sealant.

 

DIRECTIONS:

Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.

1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.)
3. Mist sufficient GLIDE onto the surface evenly.
4. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
5. Wipe off residue with clean dry microfiber towel.

NOTE: Using with 3” soft-edge DA pad is highly recommended.

Sufficient lubrication is crucial to the AUTOSCRUB application.

      Plain water is NOT an adequate lubricant.

      DO NOT use with rotary polisher.

      AUTOSCRUB is not solvent resistant.

      Remove tar & grease before application

 

Helpful Tips:

The AUTOSCRUB has a protective coating to ensure stability within transportation.

To break in the pad, moisten the AUTOSCRUB with desired lubricant.

Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the

protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky.

Cold temperatures may stiffen pad. Warm surface before using.

Nanoskin AutoScrub 6 Fine Grade Foam Pad for DA Polisher

na-rpp-group.png?v=1611256353

NANOSKIN NANO SHOCK Hydrophobic Spray Wax & Sealant –

Kit includes:, SMOOTH Instant Detail Spray 16 Oz. x 1, AUTOSCRUB Sponge General Grade x 1, HYDRO EXPRESS Hydrophobic Spray Polymer 4 Oz. x 1,

NANOSKIN Eliminate Clay with AUTOSCRUB Brilliant Shine Kit

As a cold-weather lubricant sealant solution of AUTOSCRUB, NANOSKIN BANANA ICE lubricates the paint so well while gliding the AUTOSCRUB back and

BANANA ICE Synthetic Lubricant Sealant Gel

Box contains: 1 x 50ml TOP KOTE T1 1 x pair of nitrile gloves 1 x Ultra Soft Foam Filled Appicator 1 x Instruction Sheet 1 x Microfiber Towel,

Ultra Line TOP KOTE T1 Ultra Hydrophobic Ceramic Serum

Various Brands – EliteFinish

NANOSKIN AUTOSCRUB 3 Start-Up Kit – NANOSKIN Car Care Products

NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay

NANOSKIN AUTOSCRUB 3 Start-Up Kit

NanoSkin AutoScrub Fine Foam Pad - 6 - Detailed Image

NANOSKIN AUTOSCRUB Towel 12 x 12 Fine Grade – NANOSKIN Car Care Products