The Beadsmith Steel Bench Block - Flat Anvil Jewelers Tool - Solid Metal Bench Block for Jewelry and Stamping - Protect Your Work Surface - 4 x 4 x
By A Mystery Man Writer
Last updated 16 Aug 2024
Professional: This is scratch/dent resistant, is 4”x4”x0.5” & perfect for close, detailed stamping. Flat: This block allows you to lay out your
Dimensions: 4 x 4 x 1/2 thick. Hardened, all surfaces smoothly polished, and chamfered to avoid sharp edges. Made of solid steel for resistance to
HimaPro Steel Bench Block 4x4 Flat Anvil Jewelers Tool Metal Bench Block for Jewelry and Stamping (4''x4''x1/2'')
Durable, smooth surface for work hardening wire or other metal smithing projects. Easy to handle, simple to use. Heavy weight keeps block in place on your work table. Works with most wire gauges Will work with all types of wire, including Gold, Gold-filled, Sterling Silver, Copper. These blocks are constructed of tool steel; ground flat, polished and case-hardened. 4 Inch x 4 Inch, 3/4 Inch thick.
Solid Steel Bench Block - Wire Hardening and Wire Wrapping Tool
3 Hardened Steel Combination Bench Block w/Wooden
The Beadsmith Bead Board, Grey Flocked, 3 U-Shaped
bench block jewelry making
Double Ended Horn Anvil Stainless Steel Metal Jewelry Forging Platform for DIY Jewelry Processing Making Accessories
BENCH WIZARD 36 Pc Alpha Numeric Punch Set
Here is a simple way to harden your flat metal wire designs. Place the wire on the bench block and give it a whack with a chasing hammer. Just a
The Beadsmith Steel Bench Block - Flat Anvil Jewelers Tool - Solid Metal Bench Block for Jewelry and Stamping - Protect Your Work Surface - 2.5 x 2.5
The Beadsmith Steel Bench Block - Flat Anvil Jewelers
The Beadsmith Wire Bending Pliers - Consistently make up to 6 size
The Beadsmith Double Nylon Jaw Chain Nose Pliers, 4.75
The Beadsmith Steel Bench Block - Flat Anvil Jewelers Tool - Solid
Beadsmith Suede Sandbags Anvil/Bench Block Jewelry Pads The Beadsmith Sandbag is an essential jewelers tool with many purposes. Filled with fine grain sand and encased in a thick suede, with double stitched and glued edges. It is slip resistant and can be used with or without a steel bench block. The weight of the pad keeps it in place on your work surface, also protecting your workbench from excessive wear and tear.
The Beadsmith Suede Sandbag – Anvil/Bench Block Jewelry Pad – 7” Round – Use for Jewelry Metal Stamping, Chasing, Engraving and Wire Forming – Slip
Steel Bench Block - TJ01-09804
Recommended for you
You may also like