Janome Hemmer Feet 4mm & 6mm

The Hemmer Foot is used to stitch the narrow rolled hems usually found on shirt tails, table linens, and along the edges of frills. The hemmer is designed with a scroll shaped feed on top and a straight groove on the underside which determines the width of the finished hem. The 4 mm / 6 mm set will allows for the use of heavier fabrics.

Groove on sole of foot has been specifically developed to match width of picot stitches for perfect stitch formation. Groove on sole of foot allows

Snap on Rolled Hemmer 3mm,4mm,6mm foot for JANOME,Brother,Babylock SA149,SA164

This hemming foot enables you to sew net hems more quickly than you'd be able to produce them by hand. And, this sewing foot kit works for most low shank machines with most materials that fit the sizes such as Singer, Brother, Janome domestic sewing machines.

6pcs Rolled Hem Presser Foot, Sewing Machine Presser Foot Kit, Hemming Foot Set, 3pcs Wide Rolled Hem, 3pcs Narrow Hemmer Feet Fit for Brother Singer

6mm Hem Rolled Hemmer Foot 7mm – Elna Direct

Janome 3160QDC-G Sewing and Quilting Machine With Bonus Quilt Kit

Janome Hemmer Feet 4mm & 6mm for Horizontal Rotary Hook Models

Bernina Roller Foot #51 - Blows Sew-n-Vac

Feed your fabric through the small funnel located on the front of the foot. The funnel turns the fabric under while the needle stitches it down to

Janome Hemmer Foot Set 4mm & 6mm 200326001

Janome Sewing Machine Cherry Blossom Pink Bobbins 25 Ct

Used to stitch the narrow rolled hems usually found on shirt tails, table linens, and along the edges of frills., Janome Part Number: 200326001, Our

Janome Hemmer Feet (4mm & 6mm) (Horizontal Rotary Hook)

Janome Hemmer Feet Set (4mm & 6mm) - Red Deer Sewing Centre

6 Sizes Presser Foot, TSV 3pcs Wide Rolled Hem Presser Foot, 3pcs Narrow Hemmer, Household DIY Spare Parts Accessories Fit for Brother, Singer Janome Low Shank Sewing Machines, Silver

The Hemmer Foot is used to stitch the narrow rolled hems usually found on shirt tails, table linens, and along the edges of frills. The hemmer is designed with a scroll shaped feed on top and a straight groove on the underside which determines the width of the finished hem. The 4 mm / 6 mm set will allows for the use of heavier fabrics.

Janome Hemmer Feet 4mm & 6mm

JANOME Products - Couling Sewing Machines

🧵 Janome Jem Gold 660 Sewing Machine: Unveiling the…

Hemmer Feet Set (4mm & 6mm) 200326001 - Janome