Ecofreen DTF Hot Peel Film - Roll – DTF Station

NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink Ecofreen Premium Plus film has now been upgraded to Ecofreen Ultimate film at no additional cost. Features: After baking the powder, solid white for more vibrant colors. Even and regular particles for the fine qualit
NOTE: All Ecofreen films are NOT compatible with STS Mutoh Printers and Prestige High Viscosity DTF Ink Ecofreen Premium Plus film has now been upgraded to Ecofreen Ultimate film at no additional cost. Features: After baking the powder, solid white for more vibrant colors. Even and regular particles for the fine quality of graphic and good adherence. Finely coated film for no pinholes! Sizes: 11.8 x 109 Yard (30cm x 100m) (Pack of 2) 13 x 109 Yard (33cm x 100m) (Pack of 2) 16 x 109 Yard (40.64cm x 100m) (Pack of 1) - NOT Compatible with DTF Station Seismo A16 Powder Shaker 23.6 x 109 Yard (60cm x 100m) (Pack of 1) Instructions: Print the image onto the matte side of the film in mirror mode. (CMYK>>White Ink) Apply hot melt powder evenly and remove the excess powder. Use a Seismo Shaker unit - like the Seismo S20 - to apply powder with ease! Hover with a heat press to bake the hot melt powder (340°F, 5min). Or use a curing oven (300-315 °F, 1min). Transfer the image by heat press at 330°F for 15sec with medium pressure. After the first press, Option 1: Wait for 4-6 seconds and remove the film gently Option 2: Rub the top surface with a cloth to remove some heat and peel off the film gently Heat press again at 330°F 5-10sec with medium pressure to enhance softer hand feel. WARNING Powder should NOT be applied on the printer platen. It needs to be applied AWAY from the printer. Application near the printer increases the risk of printer damage if the printer breathes in the adhesive powder into the intake fan by the electronics near the back of the machine. Damage to the printer for inappropriate use may not be covered under warranty. Please wear Personal Protective Equipment (eyeglasses, mask, and gloves) when working with DTF products. The fumes from curing the powder can be hazardous. NOTE DTF (Direct To Film) products works with almost all types of fabrics including 100% polyester with good quality results! Transfer Film does not require pre-treatment and it uses minimum 75% less DTG inks on to get good quality. The designed fabrics or printed shirts have a good wash characteristics. The fabric has very slight hand feel touch. The process is much faster than Vinyl printing (Vinyl Printer). NOTE: DTF Station Film A3 and A3+ Sheets and A3+ (13) Rolls have returned to their normal pricing, after a temporary price decrease.

DTF Station Warm Peel DTF Film Rolls

Direct to Film Printer · Ecofreen

Seismo S20 DTF Powder Station – DTF Station

Ecofreen Transfer Film for Direct to Film (Hot Peel DTF) 13 x 19 200 Sheets - Imaging Spectrum

DTF Station Transfer Film Sheets

DTF Hot Peel Film V2 - Sheets (14 x 16 - 100 Sheets) (Brother & Epso – Rubenstein RB Digital Inc

, DTF (Direct to Film) use ONLY., The DTF film works in any DTF printer, 200 sheets in a pack, Coated PET Film available in sheets , This

DTF Station Transfer Film Sheets

DTF Station Hot Peel Film Rolls

Ecofreen Transfer Film (Hot Peel) for Direct to Film - 109 Yard Roll

Ecofreen Transfer Film (Hot Peel) for Direct to Film

DTF Station Warm Peel Film for All Direct to Film Printers

DTF Station Warm Peel Film for All Direct to Film Printers