Duratec Clear Hi-Gloss Gel Coat Additive - Case (4 Gallons)

Duratec Clear High Gloss Additive can be blended with numerous gel coats to create a glossy, smooth finished surface. Mix at a 1:1 ratio with regular gel coat to reduce viscosity and porosity, improve gloss level, and permit a complete open-air cure. It can also be blended at 15% with tooling gel coats to upgrade mold surfaces, improve gloss retention, increase impact resistance, and reduce heat distortion.

Black Tooling Gelcoat (Polyester) - LeapTech Composite Materials

Rexco – Formula Five Mold Cleaner #2 – 1 Gal (Past Shelf Life

Blend with gelcoat to create a repair coating or to improve the initial properties of the gelcoat. A 50:50 blend with gelcoat will air-cure, even at the thin edge of a repair. Makes gelcoat spray like paint Contains special additives to prevent UV-induced yellowing and gloss loss. Reduce Porosity in tooling gelcoat. Improves air release thus preventing porosity. You'll get a superior finish, add quality and save time and labor with Duratec Polyester Hi-Gloss Additive.

904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon)

Black Tooling Polyester Gelcoat 1 Gallon with Hardener MEKP DDM-9 - Composite Envisions

Duratec Hi Gloss Additive, Clear

Duratec & Polyester Products - Body Filler - Sunshield - Duraglas

904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon

Quart White Marine Gelcoat

HK ISO Tooling Gelcoat - Orange

You'll get a superior finish, add quality and save time and labor with Duratec Polyester Hi-Gloss Additive. Low Porosity---when used for repairs,

904-001 Duratec Clear Hi-Gloss Additive for Gelcoat (Gallon)