Durston 1309 The Complete Jump Ringer

The Durston Complete Jump Ringer is a jump ring making machine that is used with a Foredom No. 30 style handpiece and a flex shaft machine. With it you can mass produce jump rings from soft* non-ferrous jewelry wire like gold, copper and silver. The jump rings can be made with wire as thick as 13 gauge (1.85 mm). The i
The Durston Complete Jump Ringer is a jump ring making machine that is used with a Foredom No. 30 style handpiece and a flex shaft machine. With it you can mass produce jump rings from soft* non-ferrous jewelry wire like gold, copper and silver. The jump rings can be made with wire as thick as 13 gauge (1.85 mm). The inside diameter of the jump rings can be as small as 2 mm and as large as 12 mm. The outside diameter of your rings will vary depending on the wire diameter you use. The most popular sized wire for making jump rings used in the jewelry industry is anywhere from 0.8 mm to 1.0 mm.The Complete Jump Ringer from Durston has many improvements over the original Durston Ringer. It now includes a coil holder which is part of the main base for greater stability. It also has a safety coil winder which can be moved and positioned anywhere on your bench. The increased mandrel length (4-3/4") and coil holder length means you can produce more jump rings at one go. The high stem gives more room for your hands and is movable in a complete 360 degree circle.Includes: 21 MandrelsMandrels Range from the smallest at 2 mm up to the largest at 12 mm in 1/2 mm sizes. The smallest 4 mandrels, sizes 2 mm, 2.5 mm, 3 mm and 4 mm do are not drilled with holes. All other mandrels are drilled with holes.2-Sided Coil Holder x 11-1/4" High Speed Steel Saw Blade x 1Saw Blade Mandrel x 1Handpiece Holder x 1Coil Winder with Keyless Chuck x 1Hex keys x 3The Durston Complete Jump Ringer is used with a Foredom No. 30 Type Handpiece powered by a flex shaft machine. Flex shaft and handpiece sold separately.*Not for use with platinum, titanium, steel or niobium wire.
The Durston Complete Jump Ringer is a jump ring making machine that is used with a Foredom No. 30 style handpiece and a flex shaft machine. With it you can mass produce jump rings from soft* non-ferrous jewelry wire like gold, copper and silver. The jump rings can be made with wire as thick as 13 gauge (1.85 mm). The inside diameter of the jump rings can be as small as 2 mm and as large as 12 mm. The outside diameter of your rings will vary depending on the wire diameter you use. The most popular sized wire for making jump rings used in the jewelry industry is anywhere from 0.8 mm to 1.0 mm.

The Complete Jump Ringer from Durston has many improvements over the original Durston Ringer. It now includes a coil holder which is part of the main base for greater stability. It also has a safety coil winder which can be moved and positioned anywhere on your bench. The increased mandrel length (4-3/4) and coil holder length means you can produce more jump rings at one go. The high stem gives more room for your hands and is movable in a complete 360 degree circle.

Includes: 21 Mandrels

Mandrels Range from the smallest at 2 mm up to the largest at 12 mm in 1/2 mm sizes. The smallest 4 mandrels, sizes 2 mm, 2.5 mm, 3 mm and 4 mm do are not drilled with holes. All other mandrels are drilled with holes.

• 2-Sided Coil Holder x 1
• 1-1/4 High Speed Steel Saw Blade x 1
• Saw Blade Mandrel x 1
• Handpiece Holder x 1
• Coil Winder with Keyless Chuck x 1
• Hex keys x 3

The Durston Complete Jump Ringer is used with a Foredom No. 30 Type Handpiece powered by a flex shaft machine. Flex shaft and handpiece sold separately.

*Not for use with platinum, titanium, steel or niobium wire.

Jump Ring Formers

Durston The Complete Jump Ring Forming Set 1309 - TJ1309

Elliman Magazine The Art Issue 2023 by Douglas Elliman - Issuu

Durston The Complete Jump Ring Forming Set 1309 - TJ1309

New bench tool: Durston jump ringer kit, custom storage board - Bench Exchange - Ganoksin Orchid Jewelry Forum Community for Jewelers and Metalsmiths

This handpiece has an adjustable key-type chuck for shanks up to 5/32. The sealed ball bearings need no lubrication. A chuck key is included. The choice where you intend to use small drills as well as small or regular burrs. Rubberized non-slip grip available separately. Made in USA.

Foredom Adjustable Chuck Handpiece H.30

Durston The Ringer Jump Ring Maker Kit

Remington Industries - Metal Work, Soldering and Metal Fittings - Model Ship World™

Durston 1312 Quad Jump Ringer

Jump Ring Makers — Otto Frei

The Complete Ringer from Durston Tools. The set includes a coil holder which is now part of the main base for the great stability, and a safety coil

The Complete Jump Ring Forming Set

Scaffold-Hopping Strategy on a Series of Proteasome Inhibitors Led to a Preclinical Candidate for the Treatment of Visceral Leishmaniasis