Large Chenille Iron on Custom Embroidery Patches – Scratch Decor

By A Mystery Man Writer

Last updated 16 Aug 2024

Large Chenille Iron on Custom Embroidery Patches – Scratch Decor

Large Iron on Custom Embroidery Patches
These Chenille Letters Match Perfectly! Large Iron-on Patches AMAZING Quality Chenille Patch!! This is an IRON-ON or SEW-ON PATCH NOT DTF OR VINYL!! Perfect for DIY! Sweatshirts, Bagsetc.! Size: Approximately 11 inches Tall x 9.75 Wide PRESS INSTRUCTIONS 1. Place the patch on the material chenille side up 2. Place cotton fabric over patch (or Teflon *preferred/Parchment Paper). 3. Iron over patch, applying pressure, on high (approx. 150f) for about 30 seconds without steam. 4. Iron inside of garment underneath patch for 30 seconds *Repeat as necessary Professional Heat press temp is about 320f degrees, but temperature could vary by machine. Do not apply direct heat to the chenille side of the patch without protective layer (or Teflon *preferred/Parchment Paper). Always press from underneath - garment or bag/item inside out We are not responsible for melting or overheating. We recommend testing the patch with several temperatures and methods best for you and your machine. Every heat press is different. Make sure adhesive melts (without bleeding out the sides of letter/patch) and the patch is firmly attached, and the edges are secure. The patches can also be stitched to prevent patches from falling off or use liquid stitch. Machine wash delicate, INSIDE OUT, always cold water no bleach or fabric softeners Air dry is the best option - never dry on heat cycle or use fabric softeners