Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://www.in2detailing.co.uk/cdn/shop/files/image404499863_grande.jpg?v=1702655853)
With Soft 99's Glaco W Jet Strong chemical liquid wiper, its double-jet nozzle and more powerful gas pressure allows the spray to reach long distances. That's why, even on a wide windshield, it takes only 3 seconds to complete the coating.
The durability of water repellency is increased by 50% compared to conventional repellents, which makes its effect last for a long time. The cap can be used to vent gas after use, and it can conveniently be taken apart and separated for disposal.
Directions for Use
- If applied on dry glass: Wash the car thoroughly and prepare the windows with a dedicated product – Glaco Compound Roll On or Compound Z, then rinse and dry the windows.
- Spray onto the windshield for about 3 seconds, making a Z-shaped motion.
- Wipe off with a slightly damp towel or microfiber, spreading the agent on the windshield. Continue until the windshield is perfectly clear.
TIP: If applied on wet glass: spray onto the windshield for about 3 seconds, then turn on the wipers.
Size: 180ml
The Brake Cleaner is the ideal spray for cleaning and degreasing brakes, motor- and gear parts. It removes brake dust, smut, fat and oil emulsive arrears easily, quickly and effectively and features a good compatibility of materials.
- easy, quick and effective
Application
- Processing temperature min. 15 °C.
- Spray the parts to be cleaned vigorously.
- Allow the surface to flash-off. TIP: Do not spray on hot surfaces!
With the Brake Caliper Lacquer and the Brake Caliper Lacquer NEON you give your vehicle a very individual and sporty look. It permanently seals and preserves the surface and is chemical, corrosion and oil resistant. It has a long-lasting gloss and is easy to clean. With the included basecoat our Brake Caliper Lacquer NEON displays an exceedingly intense luminosity.
- 7 pieces set or 10 pieces set (for NEON colours)
- heat resistant
- chemical, corrosion and oil resistant
- easy and exact application with a paint brush
- no need to dismantle any car parts
- sufficient for 4 brake calipers
- Use NEON colours only with the included basecoat
The Brake Caliper Lacquer set includes:
- Brake cleaner, 400 ml and 125 ml paint as well as 50 ml hardener
- Steel brush, brush, spatula, 1 pair of disposable protective gloves
The DAS-6 PRO Dual Action Polisher v2 builds on the popular DAS-6 and offers even better performance.
This new model features a number of upgrades over the previous generation. It contains a more powerful 900w motor which delivers much more low end power.
In addition, the DAS-6 PRO features a rubberised front grip handle and counterweight shield. The bearings and gearing have been refreshed for an even smoother action, making this amongst the smoothest, easiest to use dual action car polishers on the market. The brushes have also been made so they can be changed externally making servicing the machine much easier.
The new machine now comes with a 3 (75mm) backing plate for those tighter areas and a high quality foam cutting and finishing pad.
The machine comes supplied with a UK 240v or EU 110v plug, is fully CE marked and has the peace of mind of a 1 year manufacturer’s warranty. Improvements include a heavy duty 6 meter cable and a D-Handle. A special embroidered canvas carry case is supplied with every machine, perfect for storing the machine and accessories whilst not in use.
The DAS-6 PRO has been fully re-engineered and is the most powerful Dual Action Polisher on the market. The results of this extra power are a machine that cuts almost as well as a rotary but with all the safety of a dual action. Unlike other machines at low speeds the extra torque is a real benefit for application of polish.
Dual action polishers are very popular with car enthusiasts and professionals alike as they are low risk but give much better results than polishing by hand. With a powerful 900w motor it is possible to removes scratches and swirl marks when used in conjunction with a polish. It is also a perfect for applying glazes, sealants and waxes.
Specifications:
- Orbit Size: 9mm
- Backing Plate Thread Size: 5/16
- Variable 6 Speed Dial: 2,500 to 6,500rpm
- Weight: 2.3kg (approx)
- Supplied with two Velcro Backing Plates Size: 125mm (5) and 75mm (3)
- Supplied with two foam pads: 1 x Green Correction and 1 x Blue Finishing
- Fits 3, 4, 5, 6 and 6.5 polishing pads
Key Features:
- Heavy Duty 900w Motor
- CE marked / 240v with UK plug or 110v with EU plug
- 6 Meter Heavy Duty Cable
- D-Handle
- Canvas Carry Case
- Aluminium Gear Housing Cover
- CNC Finished Gears
- Electricity Feedback Circuit
- 1 Year UK Manufacturer Warranty
Foam Cannon Pro and Foam Cannon S are new generation Foam Cannons, powered by MJJC’s new generation foam technology. This new technology is stronger and creates more, thicker foam with less soap, even with smaller pressure washers. They have a better connection system. This allows them to attach to your pressure washer easily, and makes changing attachments easier and faster.
Simply put, they are better, stronger, and save you soap, while creating more foam, making it easier and quicker to foam your vehicle.
Please note regarding connectors. If you have a short trigger gun, you will need to 1/4 quick release option from the drop down menu.
If you have a Kranzle Pressure washer, please check whether your connector is a D10 or D12 and select accordingly from the drop down menu.
If you have a Nilfisk domestic pressure washer (C/E/P series) you will either need the Gerni/New Nilfisk connector if your pressure washer was purchased within the last 2-3 years. For older machines, please purchase the Nilfisk/Kew/Alto option.
If you have an AVA Pressure washer, unfortunately this item is NOT compatible with your pressure washer
Features
- Larger Tank (approximately 1200ml) increases foam production.
- Anti-leak Tank Cap allows you to foam chassis or roof without leaking.
- Leak-proof stability is perfect for storing extra or leftover cleaning solution.
- 360° Degree Adjustable Spray Direction feature makes it easier to foam the roof and chassis of your vehicle.
- Better foam fan is produced with the new spray nozzle.
- Thicker foam is produced using less shampoo(soap), which saves you money.
- Produces 30% denser foam than the first generation foam cannon with the same amount of shampoo.
- Thick foam can be produced even with 90Bar(1300psi) pressure washers.
- New connection system (patent pending) makes it easier to attach fittings, no need for PTFE tape or glue.
- New design makes it easier to change the orifice nozzle and mesh filter.
Description
- Is larger, more stable, and the leakproof tank cap allows you to better foam your vehicle’s chassis and roof, as well as store remaining liquid without leaking.
- Is designed with the new generation MJJC foam cannon technology, allowing you to rotate the spray nozzle 360° degrees to foam your vehicle’s roof and chassis easier without wasting foam.
- Produces 30% denser foam than the classic foam cannon, while using as little as 100ml of shampoo per 900ml water(1:9 ratio). That means you can create more foam while using less shampoo.
- Produces proper foam even with a 90Bar (1300psi) pressure washer. You won’t need to buy a larger pressure washing machine to produce a dense foam.
- Features the foam fan spray adjuster and top knob, making it easy-to-use!
- Available in a variety of adapters that fit most pressure washers.
- Comes with a 1.25mm orifice nozzle installed and a 1.1mm orifice nozzle as a spare
- Designed with the new patented Click & Play connection system. Just screw it on, no need for extra PTFE tape or glue to seal your adapters.
- Built with new generation construction, making it stronger and more robust.
- Is newly designed, making it easier to change the orifice nozzle and stainless steel mesh filter.
Bilt Hamber Auto Wheel Alloy Wheel Cleaner 1 Litre Spray Bottle/5 Litre Jerry Can
A non-acid, non-alkaline wheel cleaner that quickly and in over 90% of cases touch less reactive wheel cleaner.
In most cases steel and alloy wheels are either lacquered or painted these coatings protect the metallic surface from corrosion and provide attractive finishes to automotive road wheels.
As vehicles brake the dust generated from pads discs and drums is at elevated temperatures, amongst this hot cloud are thousands of particles of hot metallic particles, these bombard the wheel finishes and effectively embed themselves in the finish.
Once lodged they are extremely difficult to remove, acid based wheel cleaners attack these metal particles and effectively attack the particle reducing its size allowing the particle and dirt clinging to it to escape, caustic wheel cleaners are less effective than acid ones on brake dust but can attack organic coatings such as lacquers and paints on short exposure they attack any organic matter accumulated around the embedded particle and produce a seemingly clean surface, however with continued use they will dull and diminish the coating, leaving a wheel surface that needs refinishing.
Safer and more effective auto-wheel works in an entirely different way, and has proven itself by winning independent tests conducted by the UK’s biggest selling automotive magazine even against powerful acid and alkaline cleaners. See the test here!
Auto-wheel’s pH neutral formulations reacts with the oxidising surface of the metallic particle rendering it water soluble, the rapid removal of this microscopically rusted surface reduces the embedded particle size and releases it from the surface, unlike acids this method is harmless to the wheel’s finish and in fact so fast it cleans more effectively – the reaction is seen by a rapid colour change from clear to deep red, after which a simply hose or rinse leaves the wheel spotless. In severe cases a brush can be used to assist the process.
We are always getting asked for a good quality, plush microfibre cloth at a low price. These high quality, low priced yellow microfibre cloths are our answer. Coming in at 350gsm they are soft, plush and, taken care of properly, will last for many years to come. These cloths can be used for pretty much any job, from removing wax and polish residue, to wiping down and dressing your interior dash. Manufactured in Korean to our exact specification and quality standards, these cloths also come with an ultrasonic cut borderless edge, guaranteeing it is scratch free even on the most delicate of paints.
Each Towel measures 16 x 16 (40cm x 40cm) Machine Wash 40°C, do not use fabric conditioner.
Each towel is Yellow in colour
Please note - discount codes will not work on this product.
Technical Details:
Size: 16 in. x 16 in.
Fabric Weight: 350 grams per square meter (GSM)
Towel Weight: 40 grams (approx.)
Fabric Blend: 80% Polyester - 20% Polyamide - 100% Split Microfiber
Edge Type: Ultrasonic Cut Edgeless
Country of Origin: Korea
Bilt Hamber Surfex HD - 1 Litre Spray Bottle/5 Litre Jerry Can
Multi Purpose Cleaner/Degreaser
With increasing restrictions on the use of solvent-containing degreasers and cleaners safer, water-based materials have been developed. However it has been difficult to match the performance of the solvent-containing systems and increasing environmental restrictions on the ranges of acceptable water-based actives have further tested the formulators’ ability. Bilt-Hamber surfex HD provides performance levels that match and even exceed solvent systems while meeting the latest standards of biodegradability. surfex HD attacks all oil and grease based soiling, but unlike solvent based cleaners will additionally and effortlessly clean organic, or water deposited grime. Surfex HD can be adjusted in strength to suit the level of soil, remaining active at add levels of just 1 part to 200 in water for light work, or used neat for extreme duty. Surfex HD is recommended for all arduous automotive, commercial and domestic cleaning duties. Can be used on paint, alloy wheels, tyres, fabric, carpets and most surfaces. Spot tests are always advisable. Surfex HD can be sprayed, brushed or applied using pressure washer equipment.
A Comparison
Surfex HD contains zero VOC’s, is biodegradable, non-toxic and pleasant to use, yet it’s ability to remove grease and oil based contamination exceeds many well-know solvent based degreasers. Using water-based degreasers allows the adjustment of strength to suit the job, Surfex HD can be added to water at just 0.5% to form an effective cleaner for light application and increased in strength to neat if required for heavy industrial applications.
Please Note - Always Spot Test Before Use
An ergonomically designed Tyre Brush designed to deep cleans tyres, ridding them of dirt, grime and previously applied dressings. Its lightweight design and stiff nylon bristles ensure maximum scrubbing power with minimal user effort. There is nothing more appealing on a detailed vehicle than a freshly dressed set of tires.
Clean wheels, shiny paint, and streak-free glass mean nothing to most car care enthusiasts if their tyres don’t look perfectly dressed to impress. Thoroughly cleaning your tires is critical to your tyre dressing’s performance, both in terms of appearance and durability.
The cleaner your tyre, the longer your favorite tyre dressing will last.
Först Citrus Pre Cleaner / Pre Wash
The first choice for dirtier jobs.
If your car is really filthy or needs a bit of a spring clean, strip off heavier contamination with Först, our citrus Traffic Film Remover (TFR).
Natural orange oil within the formula doesn’t just boost cleaning – it smells great, as well.
How To Use Citrus Pre Cleaner / Pre Wash?
- Apply it neat to affected areas, leave it for a while to do its thing, then rinse off with your jet wash.
- It’s got more cleaning power than snow foam because there’s no aeration from the foam and it’s sprayed on at full strength using our effective litre spray bottle. Helping your citrus pre wash to be even across the car and not waste the citrus pre cleaner.
- Covering the whole car can waste product, so only spray it on the dirty areas (usually the lower half, and rear, of the car is enough).
- Great value for a litre, because we know you’ll be using this a lot – especially during the winter, enjoy our premium citrus pre wash today.
in2Detailing GEN 2 DA8 Dual Action Machine Polisher **Now Supplied with both 5 (125mm) and 3 (75mm) Backing Plates
Overview:
- A TRULY COMPLETE SET - Comes with 1x 900W DA 8 Pro Polisher, 6m Cable with CE Certified UK Plug, 5/125mm (Suitable for 5 or 5.5 inch pads) and 3/75mm (Suitable for 3 or 3.5 inch pads) Backing Plates, D Handle, Spare set of Carbon Brushes, Carry Case, Wrench and Allen Key
- NEW COMFORT GRIP RUBBER HEAD AND SLIMLINE BODY - A couple of little additions/modifications that we feel make the machine more comfortable to use over a long period of time
- MORE POWERFUL THAN ITS COMPETITORS - Other polishers use 400/500/600W Motors. We have used a 900W super powerful motor to give the user the best paint correction and finish possible.
- TRIED AND TESTED - Simply put, we have had these machines rigorously tested to make sure they meet the standards you expect when purchasing a high-end machine polisher
- SAFE FOR BEGINNERS - Just starting out and scared of damaging your paintwork? Random orbital (dual action) polishers are safer than thier Rotary counterparts as the random orbit in which the pad spins means less heat is generated. Less heat = less chance of damaging your precious paintwork.
-
12 MONTH WARRANTY - A no questions asked 12 month Warranty against manufacturer faults. In the unlikely event your machine develops a fault you can return it to us to either be repaired or replaced. Can't say fairer than that
in2Detailing is please to release it's new Dual Action machine polisher that is similar to the well know DAS 6 Pro. The machine still features a market leading 900W motor however internally it is not the same motor found in the DAS 6 Pro (similar to how 2 car manufacturers can have a 2 Litre Diesel Engine that are not the same).
Aside from the internal motor modifications there have been a couple of slight changes to the exterior shell aswell. Firstly the easily identifiable front rubber grip that offer an easy to grip, comfortable way for users to hold and manoeuvre the machine. Secondly the body is slightly slimmer, so in our opinion a bit nicer to hold. Lastly, the vents have been repositioned to keep the temperatures of the machine down whilst polishing.
The machine still comes with a 6 Metre heavy duty rubber cable as well as a new vented 5 inch backing plate to offer better cooling to the pads. A 3 inch backing plate is also provided allowing you to tackle more areas from this single machine. As an added bonus we have had some great quality carry bags manufactured to you can transport the machine with ease
Specifications
- Power Consumption: 900 watts
- Operating Voltage: 240 VAC, 50-60Hz
- Lifting speed: 2500-6800 min-1
- Weight: 2.3kg
- Cable length: 6m
- Polierhub (throw): 8 mm
- Thread connection: 5/16 -24
- Backing Plate diameter: 125 mm and 75mm
- Certified by: CE
Contents:
- GEN 2 Dual Action Machine Polisher
- D handle
- Velcro backing pad 125 mm and 75mm
- Allen key for Velcro pad
- Carry Case
- Spare set of Carbon Brushes
Speed control:
- Level 1-2: Apply wax or sealant
- Level 3-4: Polishing of the vehicle, for minor to medium defects
- Level 5-6: Removing deep scratches or defects
PLEASE NOTE - DISCOUNT CODES WILL NOT WORK ON THIS PRODUCT
Detailing Kingdom Next Cut 1.1 - 500ml/4 Litre
Detailing Kingdom Next Cut 1.1 has been designed from the ground up with the latest compound technology. Next Cut 1.1 is a water based diminishing abrassive compound utilising a homogenous grain that has been specifically designed to be used on hard and soft clear coats. It can eliminate deep scratches (P1500) and due to the diminishing abrassives, will also leave a high gloss finish. To further enhance the finish we recommend following with Next Cut Finale.
On softer paints where some users can experience 'stickiness' due to heat build up, we recommend spraying the pad with Detailing Kingdom Celebrate which will not only help to reduce the temperature but will also act as a lubricant.
Next Cut 1.1 has been designed to produce little to no dust and polish residue can be removed with absolute ease. It really is quite a unique compound.
For an exhnaced finish as a one step compound on minor defects, Next Cut 1.1 can be combined with FDT or FDC. For this, users would add 4 pea size drops of Next Cut 1.1 and 2-3 of FDT or FDC and polish as usual. The finish will be extremely glossy and protected.
Next cut 1.1 contains no silicone or fillers and is bodyshop safe
Detailing Kingdom Next Cut Finale - 500ml/4 Litre
Detailing Kingdom Next Cut Finale is a water based diminishing abrassive anti-hologram polish. Next Cut Finale can be used to further exhance the finish after polishing with Next Cut 1.1 or Next Cut 3.3. Next Cut Finale can also be used to remove light defects such as 5000 grit sanding marks, fine microscratches, and swirl marks.
Next Cut Finale has been designed to produce little to no dust and polish residue can be removed with absolute ease.
We recommend following Next Cut Finale with Detailing Kingdom FDT or FDC sealant to protect the finish and make it easier to clean.
Next Cut Finale contains no silicone or fillers and is bodyshop safe
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](http://www.in2detailing.co.uk/cdn/shop/products/Empty_Pro_Spray_Bottle_With_Dilution_Markings__947ml_1200x1200.jpg?v=1591796203)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://shop.simoniz.com/customer-content/shop/products/Photos/Full/STH7157.png)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://www.chemicalguys.eu/pub/media/catalog/product/c/h/chemicalguys.eu-acc_135-duck-foaming-trigger-sprayer.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://www.in2detailing.co.uk/cdn/shop/products/Kwazar_Mercury_Pro__0.5_Litre_Double-Action___360_Trigger_Spray_420x.jpg?v=1591771942)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://m.media-amazon.com/images/I/51YXD04pi0L._AC_UF350,350_QL80_.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://ic.toolsid.com/chemical-guys/items/video/acc-135-2_720p_2.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://m.media-amazon.com/images/I/61lzAQ7si1L._UX250_.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://static.pxlecdn.com/photos/269539048/medium/0b59425f83b438fa37d1.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://images.thdstatic.com/productImages/016378f5-6059-432e-a236-ccc414f90a15/svn/harris-spray-bottles-360-32s-4pack-64_300.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://i.ytimg.com/vi/uOZjOKoUeFM/maxresdefault.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://static.pxlecdn.com/photos/262299660/medium/200dde9d563f826c04ca.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://shop.simoniz.com/customer-content/shop/products/Photos/Full/STH7158.png)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://www.chemicalguys.com/dw/image/v2/BCPT_PRD/on/demandware.static/-/Sites-chemicalguys-master-catalog/default/dwb414e184/hi-res/vr-kits-images/5-9-22-HOL00007.jpg?sw=400&sh=400&sm=fit&sfrm=png)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://i.ytimg.com/vi/qiGpV1dy4rI/maxresdefault.jpg)
![Chemical Guys Foaming Trigger Spray Bottle (32 oz) – in2Detailing](https://www.chemicalguys.com/dw/image/v2/BCPT_PRD/on/demandware.static/-/Sites-chemicalguys-master-catalog/default/dw00ec540d/hi-res/CLD_997_16.jpg?sw=400&sh=400&sm=fit&sfrm=png)