CNCEST Precision Rotary Paper Cutter Trimmer Art Board

The hob adopts an automatic paper weighting design, self-grinding rollerblade, and grinding tool body, which makes the hob automatically sharpen and durable. The cutting size is in centimeters and inches, convenient, fast, safe, and practical. Avoid paper transfer and paper feed. The finished product has no burrs, which is an effect that ordinary cutters cannot achieve. It can cut a variety of photographic papers without sharpening the tool or changing the blade regularly. The film, hot and cold paper, art paper cardboard, office paper, thin plastic soft board, rubber soft board, copper treasure, aluminum, PVC, etc. parameter: Model: 36 inches Cutting: 91CM Discretion: 1 mm Cutting table: 120 * 33cm The blade is sharp, not only can cut ten copies at a time. PVC cards are also easily cut off. Precautions: 1. When cutting, the knife box should be evenly applied in the direction of the guide rod. Do not apply force in other directions. 2. After the work is completed, park the knife box at one end of the guide. 3. For safety reasons, do not touch the blade with your hand. As shown in Figure 4, the blade typically does not need to be replaced, but when the blade is slotted or deformed and the blade becomes dull and unusable, the blade needs to be replaced. Description: 1. Flatten the paper to be cut under the plexiglass ruler and prepare it on the cutting table according to the required size. 2. Pull the knife box from one end to the other to complete the work. Note: 1. When cutting, the tool holder should be evenly applied in the direction of the guide rod. Do not apply force in other directions. 2. After completing the work, stop the knife box at one end of the guide. 3. For your safety, do not touch the blade with your hand. 4. The blade usually does not need to be replaced, but when the blade is notched or deformed and the blade is dull and unusable, the blade needs to be replaced. Blade replacement steps: 1. When the model is 24 inches or larger, move the knife box (3) to the center of the table, then directly flip the knife box to the outside of the table, so that the blade is in the visible position, but not too strong, so as not to guide The rod is deformed. 2. Use a micro screwdriver to remove the top screw (1) from the knife box, then use the wire cutter to gently pull down the shaft (8) to remove the mold (5). 3. Insert the special wrench into the mold hole and the round nut and turn it counterclockwise to remove the blade. 4. When the knife box is installed, the blade plane is close to the lower blade, and the chamfered surface of the blade should be outward.

49CC 2-strokes Hand Push Type Grass Cutter Garden Tool Lawn Mower Trimmer Gasoline Brush Cutter 110V 1800W - AliExpress

Paper Cutters and Trimmers

X-ACTO Heavy Duty Wood Guillotine Trimmer, 15 Inches : Paper Trimmers : Office Products

24'' Rotary Paper Trimmers and Cutters, Manual Precision Rotary Paper Trimmer Rolling Paper Cutter Tool for Cutting Photo Paper/Film/ Art Card Paper (Model: 24-Inches) : Office Products

Rotary paper and lamination trimmers and supplies

49CC 2-strokes Hand Push Type Grass Cutter Garden Tool Lawn Mower Trimmer Gasoline Brush Cutter 110V 1800W - AliExpress

US Stock - 24 Inch Manual Precision Rotary Paper Trimmer, Sharp Photo Paper Cutter, Rotary Paper Cutter Trimmer : Office Products

Pin on Printing and Graphic Arts

carl rotary paper trimmer, rotary blade, steel alignment grid board, safety blade

Professional Safety Rotary Paper Cutter