TotalBoat Aluminum Boat Barrier Coat Primer Gallon Kit Gray

TotalBoat Aluminum Boat Barrier Coat is a high-build epoxy primer that creates a moisture barrier to protect aluminum and pontoon boats. Its anti-corrosive properties are ideal for protecting all underwater metals including lead, bronze, cast iron, stainless, and aluminum. Compare to Interlux InterProtect 2000E and Pettit Protect epoxy primers.

High-build, two-component epoxy primer and barrier coat for excellent corrosion prevention on aluminum hulls and pontoon boats. Can be overcoated with

TotalBoat Aluminum Boat Barrier Coat (Quart, Gray) 32 Fl Oz (Pack of 1)

TotalProtect is a high build epoxy primer for use above and below the waterline. It creates a barrier coat to prevent water absorption and migration the main cause of blistered fiberglass hulls. It is also an excellent primer for all underwater metals. This 2 part primer can be used with all paints. 3 to 1 mix ratio formula is easy to use dries quickly and requires no sanding. After mixing thoroughly allow an induction period of 20 minutes prior to reduction and application.

TotalBoat TotalProtect Epoxy Barrier Coat System (White quart)

Two-Part Marine Epoxy Primer High-Build & Surfacing Formulas

Sea-Hawk Tuff Stuff High-Build Epoxy Primer

TotalBoat TotalProtect Epoxy Primer & Barrier Coat

TotalBoat Aluminum Boat Barrier Coat (Gallon, Gray) 128 Fl Oz

TotalBoat Aluminum Boat Barrier Coat (Quart, Gray) 32 Fl Oz (Pack of 1) : Sports & Outdoors

TotalBoat Aluminum Boat Paint gives aluminum and galvanized metal boats a corrosion-resistant, non-reflective low-sheen finish. While most marine paints won't stick very well, TotalBoat is specifically formulated for aluminum, making it ideal for your jon boat, duck boat, flat bottom boats, bass boats, canoe, dinghy, pontoon boat, trailers, houseboats, and other aluminum boats or boat parts, such as railings and spars.

TotalBoat Aluminum Boat Paint (Army Green, quart)

TotalBilge is an epoxy-based bilge paint used to protect bilge bulkhead and locker areas. It stands up to exposure to harmful marine elements like heat humidity mildew grease and grime. This 1 part paint is easy to apply providing superior coverage with a hard surface finish. It won't stain or mildew. Available in quart and gallon sizes in your choice of Gray or White. Antifreeze grease diesel fuel and engine oil are hard on bilges.

TotalBoat Totalbilge Epoxy Bilge Paint Quart White

TotalBoat Topside Primer is used above the waterline as an undercoat prior to painting. Compatible with all polyurethane and enamel topside paints both 1 and 2 parts. Compare to Interlux Pre-Kote and Pettit EX Prime Undercoater.

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (White, Gallon)

TotalBoat-439900 TotalProtect Epoxy Barrier Coat

TotalBoat-439900 TotalProtect Epoxy Barrier Coat System (Gray), 1 Gallon (Pack of 1) : Sports & Outdoors

Water-based ablative antifouling for inflatable boats. This flexible coating won't crack or flake when rolled up. 27% copper provides reliable protection against barnacles and growth. Environmentally friendly water-based formula is easy to apply and easy to clean up.

TotalBoat Inflatable Boat Bottom Paint