Bama Cups Epoxy Mixer

By A Mystery Man Writer

Last updated 17 Jul 2024

3D Printed Epoxy Mixer. Includes Mixer, Two Silicone Mixing Cups and 10 Jumbo Popsicle Sticks. Additional sticks can be found at any craft store or big box department store. Mixing cup holds 100ml, but recommended to mix no more than 60ml at a time. Directions: Pour each part of epoxy into the silicone cup and place i
3D Printed Epoxy Mixer. Includes Mixer, Two Silicone Mixing Cups and 10 Jumbo Popsicle Sticks. Additional sticks can be found at any craft store or big box department store. Mixing cup holds 100ml, but recommended to mix no more than 60ml at a time. Directions: Pour each part of epoxy into the silicone cup and place it in the mounted cup to spin. Insert stirring stick into arm and adjust to get the stick against the edge and completely to the bottom of the cup. Tighten the thumb-screws. Spin for 5 minutes. Turn off mixer and release the stirring stick with the thumb-screw and move the arm from over the cup, leaving the stick in the cup. Remove the cup from the mixer and give it a little 20-30 second stir, scraping the sides, and you are good to go!