Alumilite Amazing Clear - 940ml, Epoxy Resin

Amazing Clear Cast Resin is an easy to use epoxy resin which does a brilliant job both as a casting and a pouring/coating resin! A clear casting resin which works well for both thin coats and deeper casts. Using the Amazing Clear Cast Resin, only one product will allow you to create all sorts of projects; from coating paintings and filling bottle tops, to casting large bangles and paper weights.
Amazing Clear Cast Resin - our most popular all-rounder resin - easy-to-use epoxy resin which does a brilliant job both as a casting and a pouring/coating resin! Available in several sizes, from 235ml up to 7.5 litres. A clear casting resin which works well for both thin coats and deeper casts. Using the Amazing Clear Cast Resin, only one product will allow you to create all sorts of projects; from coating paintings and filling bottle tops, to casting large bangles and paper weights.  Mixes in equal ratios (1:1 by volume) so very easy to measure up equal amounts of both parts. Works perfectly with our resin moulds, with no release agent needed (however, release agents are a good way to extend the life of your mould). Can also be cast into plaster, aluminium, latex and urethane moulds if a mould making release (like Vaseline) is used. Don't use water based dyes or colours with this resin. Our Alumilite Dyes are ideal (which come in a huge range of colours, including fluorescent neon colours!), as well as any dry colours. For gorgeous shimmers and high quality metal effects, use Mica Powder Pigments or the Alumilite Metal Powders. For a glow in the dark effect, use the Phosphorescent Powder! Can be sanded, wet sanded, and/or buffed. Amazing Clear Cast works best if cast in sections less than 3/8 thickness. Available in the following sizes: Millilitre US Fl.oz. Approx weight 235ml 8 fl.oz 250gm 470ml 16 fl.oz 500gm 940ml 32 fl.oz 1kg 3.75 litres 1 US gallon 4kg 7.5 litres 2 US gallon 8kg Volume/Weight comparison; the 940ml is 32 US fl.oz., this weighs approximately 1000 grammes. Each kit consists of 2 bottles, for instance, the 32fl.oz kits comes as 1 x 16 fl.oz part A and 1 x 16 fl.oz part B, giving you a total of 32 fl.oz. Mix ratio: 1:1 by volume Work time: 45-50 minDemould time: 18-24 hours. For deeper casts, allow 24-48 hours.  Heat deflection: 54 degrees C Please note: To help with thickness, keep the Alumilite Clear Cast at a minimum of 21°C or heat the thick side in a bowl of hot tap water for 30 minutes prior to use. The thicker ACC is poured, the cloudier it can be. For thicker castings, multiple pours of 6mm - 16mm approximately 4 hours apart is recommended. The product images show projects where the resin has been layer poured or cured in a pressure pot. TOP TIP FOR STORAGE: Keep the caps on each resin bottle sealed on tight at all times. Even during use, pour out what you need, then put the caps back on immediately until your next use. This will keep your resin in good working condition for as long as possible.  Click here for an SDS for this product. Complies with FDA CFR 177.2600 Click here for a Technical Data Sheet for this product. Regarding health & safety, we always recommend doing your own research, and make your own decisions on any precautions you need to take. Read the SDS and get advice if needed. We suggest ensuring you have good ventilation, and protect your skin and eyes (use nitrile gloves only, don’t use latex with resin). If you work with a large amount of resin, or work with it often, you might want to invest in a VOC filtered face mask. GOOD NEWS - THIS RESIN CAN ALSO BE SHIPPED TO OUR EUROPEAN CUSTOMERS!

Amazing Clear Cast Epoxy Resin Kit Deep Pour Epoxy

Alumilite Amazing Clear Cast Epoxy - Rockler

Amazing Clear Cast - Casting resin clear-ly the winner!

The Amazing Clear Cast PLUS by Alumilite is a clear casting epoxy resin that produces a clear, glossy finish. Use this clear resin for coating or

Alumilite Amazing Clear Cast PLUS Epoxy Resin - 16 ounce kit

Molding & Casting by Alumilite. Details:Nothing can stop any epoxy from yellowing over time, but Alumilite has added UV protection to this formula to stall the yellowing process, ideal for coating over white backgrounds. Durability is important when it comes to epoxy resins and you can achieve that with Amazing Clear Cast Plus, which cures to a durable and high gloss finish every time and is FDA compliant. Spice up your craft by adding some color to it.

Alumilite 10591 32oz -Amazing Clear Cast

Amazing Casting Products

Alumilite Amazing Clear Cast, 16oz.

Alumilite Amazing Clear Cast Plus Epoxy Resin with Metallic Powder Bundle includes: 1-Amazing Clear Cast Plus Epoxy Resin 16oz Kit; Ocean Blue, Red

Alumilite Amazing Clear Cast Plus Epoxy & Mica Powder, Arts & Crafts, Adult 14 & up

Alumilite Corp Alumilite Amazing Epoxy Starter Kit in the Craft