PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1oz

By A Mystery Man Writer

Last updated 17 Jul 2024

PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1oz., Applicator Syringe #html-body [data-pb-style=B0EWBK9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;ba
#html-body [data-pb-style=B0EWBK9]{justify-content:flex-start;display:flex;flex-direction:column;background-position:left top;background-size:cover;background-repeat:no-repeat;background-attachment:scroll}PC-11 was formulated as a true marine epoxy, allowing users to bond to wet, dry and fully submerged substrates. PC-11 formulation provides extended working time, for large and critical jobs, which allows the user to reposition work or make changes. High "wet grab" or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids, caustics, detergents, gasoline, fuel oil, salt, and fresh water. In cold or cool temperatures, place PC-11 containers near heat prior to using. PC-11 mixes and spreads easier at 80 degree F than at 40 degree F. Any clean smooth flat surface is an excellent surface for mixing and working. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-11. Denatured alcohol is excellent for smoothing applied PC-11. Also use Denatured alcohol to clean surfaces before applying. Use with: wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations; as sealant: oil, gas, water tanks, cellar cracks, pressure tanks, and plumbing leaks; as a filler: holes, castings, patterns, molds, voids, welds, and much more. Work time (70 degree F): 30-40 minutes. Tack free cure time: 90 minutes. Cure for service: 8-12 hours. Maximum cure: 7 day. Gardner impact resistance: 140in./lb. Conduction (electric): non conductive. Excellent thermal shock. Non toxic once cured. Heat range: -20 to 200 degree F.

PC-11 was formulated as a true marine epoxy allowing users to bond to wet dry and fully submerged substrates. PC-11 formulation provides extended working time for large and critical jobs which allows the user to reposition work or make changes. High wet grab or tack of PC-11 makes overhead and sidewall work easy without drip or sag. PC-11 demonstrates excellent chemical resistance to mild acids caustics detergents gasoline fuel oil salt and fresh water.

Pc-11 White Epoxy Paste - 1 lb bucket

PC-11® Paste Epoxy – Protective Coating Company

PC-Products PC-11 Epoxy Adhesive Paste, Two-Part Marine Grade, 1oz Applicator Sy

PC-Marine is a hand moldable putty epoxy designed for quick emergency-type repairs. PC-Marine is formulated to adhere to wet, dry, and submerged, underwater surfaces that are clean. Cut, mix and apply. PC-Marine allows a working time of about 15 minutes and cures for service in 60 minutes. PC-Marine will not bond to wax paper, Teflon, polyethylene, and some other plastics. There are hundreds of uses in thousands of combination.