Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method : Office Products

Buy Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method: Money Handling Products - ✓ FREE DELIVERY possible on eligible purchases

Double Sided 5 piece set Large Folding Cone 17 Degree Die Set Made out of Hardened Stainless Steel

17 Degree Five Piece Set of Folding/Reduction Dies and Stainless Steel Stabilizer Folding Cone

USAReplacementparts Self Centering Coin Ring Punch Kit and Die Set, Coin Ring Making Tools, Punch and Die Sizes 3/8Inch, 7/16, Rust

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods

One 1.0 x 1.4 Swedish Wrap Kit for Dollar Sized Coins – Coin Ring

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method : Office Products

This is a coin ring die set of 4 dies and 9 push rods. The inside angle is 7 degrees which is much less than that of the fold over reduction dies.

4 SWEDISH WRAP DIES @ 7° FOR COIN RING TOOLS PLUS 9 PUSH RODS

SPRING 2018

4 SWEDISH WRAP Dies @ 7° For Coin Ring Tools Plus 9 Push Rods

These dies are made to do the Swedish Wrap Method. The inside angle is 7 degrees. Also with 4 different sized dies. Die 1 is approximately 1.4 at the top and 1.15 at the bottom. Die 2 is 1.3 at top and 1.05 at bottom. Die 3 is 1.2 at top and .95 at bottom. Die 4 is 1.1 at top and .85 at bottom. SW dies are 1-1/8 tall. These dies are hardened and the inside of the die is polished very smooth.

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method

Folding dies Swedish Wrap Dies Stabilizer dies 3 sizes 1.40, 1.25, 1.10

Swedish Wrap Die Set (3 pcs.) Professionally Made to Last, Coin Ring Tools

DELUXE Swedish Wrap Die Set (3 dies, 12 double sided push rods

Made in the USA

Coin Ring Making Tools, Swedish Die Wraps (4) with 9 Push Rods, Coin Ring Die Set, Swedish Wrap Method