AllFuel HST 6-Inch x 15FT Built-In Wood Fireplace Chimney Kit - BS-KIT-6-15

This kit includes commonly used equipment to vent a Built-In wood burning fireplace vertically 15ft through a roof., The Kit Includes:, Fireplace

Compatible with AllFuel HST Class-A double wall chimney pipe. Can not be connected to other brands of class-A chimney. 304 Stainless Steel

AllFuel HST Flat Top Rain Cap for 6 Diameter 304 Stainless Steel All Fuel Class-A Double Wall Insulated Chimney Pipe

opruiming > 6 wood stove pipe kit

ALLFUEL HST AllFuel 6 in. x 12 in. Double Wall Chimney Pipe

opruiming > 6 wood stove pipe kit

Fireplace Venting

ALLFUEL HST 6 in. x 48 in. Double Wall Chimney Pipe BL.EV.RB-SHT6SS48 - The Home Depot

The extended roof brace is used to help support the chimney where it extends more than 5 feet above the roof. Legs adjust from 65-130 inches and pivot at the ring and brackets to fit any roof pitch. An extended roof brace or other support must be used for every 5 feet of chimney above the roof (if your chimney extends 12 feet above your roof you need 2 roof support braces). Note: Extended Roof Brace does not support the weight of the chimney. It supports the lateral movement only.

AllFuel HST Extended Roof Brace for 6 Chimney Pipe

Fireplace Venting

ALLFUEL HST 6 in. x 48 in. Double Wall Chimney Pipe BL.EV.RB-SHT6SS48 - The Home Depot

opruiming > 6 wood stove pipe kit

The 15° Elbow Kit for 8 in. I.D. chimney pipe is used to get past rafters or away from an obstruction like plumbing, HVAC, or the roof peak. Up to 2 lengths of chimney pipe (for a maximum run of 72 in. between elbows) can be added between elbows to allow for necessary spacing. An Elbow Strap is included and helps support the weight of the offset from the elbows. If your installation includes 2 lengths of pipe between the elbows a second Elbow Strap (sold separately) is required.

AllFuel HST 15 Degree Elbow Kit for 6-Inch Inner Diameter Chimney Pipe