Sonax Perfect Finish 5 Liter Profiline One Step and Finishing Polish

By A Mystery Man Writer

Last updated 16 Jul 2024

Sonax Perfect Finish 5 Liter | Profiline One Step and Finishing Polish
Sonax Perfect Finish 5 Liter | Profiline One Step and Finishing Polish Based on extensive test results, SONAX Perfect Finish is by far, one of the most flexible compound/polishes. Works equally as well on German clear coats, Asian OEM clear coats & domestic paint finishes. Perfect Finish was developed for single step polishing of sanded paint defects such as dust inclusions or paint runs. It removes marks of P2000 grit or finer. Innovative paintwork finishing polish provides an initial deep cut, then diminishes to a high gloss, resulting in a hologram-free paint surface. Silicone-free. Directions for use:Apply a small amount (3 or 4 Dime-sized drops) of polish onto the SONAX Polishing Pad. . Polish the surface at a low rotatinf speed (800 rpm) for approximately 20-30 seconds, applying 15-20 pounds of pressure. After 30 seconds, remove pressure completely using only machine weight, increase machine speed (1200 RPM) and continue polishing for 45-60 seconds. When finished polishing, wipe down the paint surface with a SONAX Ultra-fine Microfiber Cloth.Please note:Do not allow polishing area to overheat. Regularly clean polishing sponges. Never use different polishes on one sponge, Keep from freezing.Product Size:5000ml (169.1 FL OZ) * Clean Garage Tip: With a 5 Liter you get 41.1 ounces more than you do a Gallon

The single-step detailing solution without compromise. Combining the cutting action of our compound and the finishing quality of our polish, then adding a durable acrylic wax, perfect results can be achieved in only one application. Clean, polish and protect the paint all in one step with Jescar All-in-One polish and wax. Designed to work equally well with either a rotary or DA polisher, especially when using the Jescar yellow polishing foam pad. Available in 8 ounce, 32 ounce and gallon sizes.