Three Piece(45LB, 25LB, 10LB) Gorilla Weight Mold Kit – Gorilla

The three-piece Gorilla Weight Mold kit is designed for those of you who want to lift, but not break the bank. Our kits include everything you will need to produce a beautiful, strong concrete weights. Gorilla Weight Molds are made with durable plastic which can be used multiple times, saving you hundreds of dollars. O

The three-piece Gorilla Weight Mold kit is designed for those of you who want to lift, but not break the bank. Our kits include everything you will need to produce a beautiful, strong concrete weights. Gorilla Weight Molds are made with durable plastic which can be used multiple times, saving you hundreds of dollars. Our mission at Gorilla Weight Molds is to provide people with an affordable way to stay fit.

What’s included:

One (1) 45LB, One (1) 25LB and One (1) 10LB Gorilla Weight Mold

Six (6) 2 ABS sleeves (for Olympic size barbell)

Four (4) metal wire rings (for reinforcement on 45LB and 25LB plates)

Three (3) ounces of fiber reinforcement (for reinforcement) 

One (1) 11 oz. silicone spray can

Instructions

Making a Gorilla Concrete Weights is simple! All  all you will need to purchase is high strength concrete mix with a minimum PSI of 4000 LBS. 

Step One:

Prepare your gorilla weight mold. This will involve attaching the 2 ABS sleeve to you your mold center. They should fit snug without the use of silicone or hot glue, but either can be applied to make certain the sleeves do not move during your pour.

Step Two:

Once you have the sleeves are attaches to the mold, you will need to spray the mold with the provided silicone spray. Apply a liberal coat of the silicone onto the entire inside of the mold. Just be sure to wipe off any excess, you don't want any silicone puddling as this may cause air pockets on the face of your weights. Any excess spray silicone can be wiped with a paper towel. Now your mold is ready to be filled with concrete.

Step Three:

Prepare the concrete. The size of the mold you purchased will determine the amount of concrete mix you will need. Concrete will typically retain 90%-95% is original weight when cured. So, this mean that if you want a 45LB plate you will need to fill the mold with anywhere between 49.5LBS to 47.25LBS. This will guarantee your weight plate will be at least 45LBS. Mixing the concrete is simple, just add water and the provided fiber reinforcement. We strongly recommend you wear a respirator as concrete dust can be harmful if inhaled. The amount of water will depend on the manufacturer’s recommendations, but we suggest your mix be the consistency of oatmeal.

Step Four:

Fill the mold. Now that we have our mold prepared and the concrete mix ready, we can begin to fill the mold. Filling the mold is best done in small amounts. We have found that the best results are achieved by adding the concrete to the mold by hand, we strongly recommend you wear gloves. Make sure you are packing handfuls of concrete into every crevasse to end up with a smooth finish. Once you have filed the mold halfway, you will add your metal reinforcement ring to the center of the mold. Continue filling the mold and twisting the mold in a left to right motion, this will help prevent air bubbles from being trapped and resulting in stronger weight. Lastly it is recommended to tap the side of the mold with a stick to help in releasing any trapped air bubbles in the concrete.

Step Five:

This step is optional but suggested. Cover your weights with a plastic bag. This will help keep as much of the moisture in the concrete as it cures. Set your mold aside on a flat and level surface for a minimum of 2-4 days. the longer you allow the plates to cure the stronger they will be. Concrete is at about 70% strength after a few days and fully cured in about 28 days. This does not mean you have to wait 28 days to use your weights, weight and be handled after 2-4 days.

 

AUTUMN Made in USA 25-45 LB Concrete Cement Weight Plate Mold, Mold for DIY Olympic Barbell Weights, 13 Dia : Arts, Crafts & Sewing

The Gorilla Weight Mold kit is designed for those of you who want to lift, but not break the bank. Our kits includes everything you will need to

Gorilla Weight Mold Kit

Board Solutions Gravity Barbell Weight Plates Mold - Kit Makes 45lbs 35lbs 25lbs Concrete Plates, Reusable Mold for DIY Standard and Olympic Plates to add to Home Gym 1 n

NICOLE 10 Lbs Dumbbells Silicone Mold for Concrete Home Fitness Equipment Gym Workout Strength Training

The Gorilla Weight Mold dumbbell kit is designed for those of you who want to lift, but not break the bank. Our kits include everything you will need

Gorilla Weight Dumbbell Plate Mold Kit

Best Buy: JOBY GorillaPod 5K Kit Tripod Black/red/charcoal JB01508-BWW

The Safari Ltd Mini Gorillas are always ready to go for an adventure. Their tiny size means you can take plenty more with you wherever you go Dont let size fool you though this quality figurine is professionally sculpted bringing the detail of this animal to life Safari Ltd 343322 Mini GorillasApprox. 2.5 x 2cm LHSuitable for ages 5+. Non-toxic BPA free. *Good Luck Minis are sold individually. The listed price is for a single mini.

Safari LTD Good Luck Minis Gorillas 192-Piece

AUTUMN Made in USA 25-45 LB Concrete Cement Weight Plate Mold, Mold for DIY Olympic Barbell Weights, 13 Dia : Arts, Crafts & Sewing

This Molds item by fpcsugarcraft has 140 favorites from shoppers. Ships from United Kingdom. Listed on Nov 8, 2023

Ape Silicone Mould mold 'gorilla' by FPC Sugarcraft Resin Mold, Fimo Mold, Polymer Clay Mold, Xmas Mold B029

Large Recycled Gorilla Tub® 10 GAL – Red Gorilla USA

AUTUMN Made in USA 25-45 LB Concrete Cement Weight Plate Mold, Mold for DIY Olympic Barbell Weights, 13 Dia : Arts, Crafts & Sewing

Board Solutions Gravity Barbell Weight Plates Mold - Kit Makes 45lbs 35lbs 25lbs Concrete Plates, Reusable Mold for DIY Standard and Olympic Plates to add to Home Gym 1 n

Set 4 Molds (2pcs - 55lbs, 1pcs - 45lbs, 1pcs -5lb) Plates Molds Concrete Weight Plates Barbell Discs Olympic Lifting : Sports & Outdoors