Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity

This 20 tooth servo gear has a 15 tooth servo spline found on numerous Hitec Large Size (aka Giant Scale) servos. The splined hole allows this servo gear to fit snugly onto the splined output shaft of your servo. The stock servo screw will pull the gear in place so that it bottoms out on the top of the spline, ensuring the gear will run true. Given the repeating hole pattern of Actobotics Channel, this gear is most commonly mated to an 76 tooth hub gear spaced 1.5” apart to create a 3.8 reduction between the servo gear and the driven gear. Patented. 20° Pressure AngleWidth = 1/4” (.250”)

32P, 32 Tooth, 25T 3F Spline Servo Mount Gears - ServoCity

MOTION - Servos & Accessories - Servos - Page 1 - ServoCity

This 12 tooth servo gear has a 25 tooth servo spline which is the most common spline used by the many different servo manufacturers. The splined hole

32P, 12 Tooth, 25T 3F Spline Servo Mount Gears

This 20 tooth servo gear has a 24 tooth servo spline which is common within Hitec standard size servos. The splined hole allows this servo gear to fit

Brass, 32P, 20 Tooth, C24T Spline Servo Gear

This 16 tooth servo gear has a 24 tooth servo spline which is common within Hitec standard size servos. The splined hole allows this servo gear to fit

Brass, 32P, 16 Tooth, C24T Spline Servo Gear

32P, 20 Tooth, 15T D1 Spline Servo Mount Gear (Metal)

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

1908 Series Servo Hub (25 Tooth Spline, 32mm Diameter) - ServoCity

Brass, 32P, 20 Tooth, D15T Spline Servo Gear - ServoCity