Steel block, 2.5 x 2.5 x 3/4 inch, bench block, hand stamping

Steel bench block. This simple tool has several uses. As a base for wire forging. As a base for jewelry stamping.Anytime you need a hard durable work base, this block will do the job.

Traffic & Construction Safety - Safety & Security

Try to remove a double-ended screw from a watch bracelet sometime. It can be an exercise in frustration, but if you use the new screw removing tool, the job becomes easy. Three Swiss-made blades (1.0, 1.4, 2.5mm in diameter) are friction fitted into a solid aluminum block. Just fit the bottom screw slot over the right blade and easily unscrew from the top. Makes life simple and assures that the bracelet will not be damaged, if used properly.

Eurotool Screw Removing Tool

This is a must have for stamping, chasing or flattening this is a 2.5 x 2.5 x 3/4 steel hardened then carefully drawn for stress relief steel bench

Steel Bench Block - 2.5 x 2.5 - A Must Have for STAMPING

This finely polished case-hardened steel block has a solid surface for stamping, shaping, and flattening metal.At 3/4 thick, this is a substantial

Steel Bench Block for metal stamping, small 2.5 square, 3/4 thick, tol0873

C.H. Hanson 1/4 in. Number Stamp Set 9 pc - Ace Hardware

Shop Bench Blocks at Micro-Tools

Steel Bench Block for metal stamping, small 2.5 square, 3/4 thick, t

Here is a simple way to harden your flat metal wire designs. Place the wire on the bench block and give it a whack with a chasing hammer. Just a couple of hits and your wire is set in its shape! Easy to handle, simple to use. Heavy weight keeps block in place on your work table. Works with most wire gauges Will work with most types of wire, including Gold, Gold-filled, Sterling Silver, Copper. Here is a simple way to harden your flat metal wire designs.

Beadsmith Steel Bench Block 2.5 inch X2.5 inch X.5 inch

Steel Bench Block for metal stamping, small 2.5 square, 3/4 thick, t

Steel Bench Block for metal stamping, small 2.5 square, 3/4 thick, t

Steel Economy Bench Blocks Contenti 100-080-GRP

Magnetic Wedge Stamping Block – Stamp Yours

Durable, smooth surface for work hardening wire or other metal smithing projects. Easy to handle, simple to use. Heavy weight keeps block in place on your work table. Works with most wire gauges Will work with all types of wire, including Gold, Gold-filled, Sterling Silver, Copper. These blocks are constructed of tool steel; ground flat, polished and case-hardened. 4 Inch x 4 Inch, 3/4 Inch thick.

Solid Steel Bench Block - Wire Hardening and Wire Wrapping Tool